GT5 in E620

[galensk]

Hi ,

I did a setup in a E620 with flybarless head. I ran into 2 problems

1/ the swash is 90° and the GT5 is only mixing in 120° an 135° mode...

2/ piroetting correction seems to react the same in both NORMAL and reverse...

Any hints or help is very welcome...

[NitroAl]

You might have to convert it to 120 or 140deg ccpm!
http://www.quickuk.eu/products/49/th...ate_rc-07.html
From memory you move the bellcranks to the other screw holes and change the links to suit.

[Laurens]

For your second problem, here's what to do:

1. Go to setup mode
2. Select the norm or rev
3. Move your cyclic stick to one position, say like forward nick.
4. Move your tail around. The swash should remain pointing at that original position. If it follows your piro, its wrong.

You can also just fly it, doing a piroette will be very interesting if you got piro compensation in the wrong direction. Use a bit of height for this, as it will dive towards the side of the piro direction.