Register Now

HSC · 09-17-2014, 04:11 PM

Hello ewerybodey !

Curently I em running on raptor E700 MKS 950 BLS on ciclic and Futaba BLS 251 on tail...
But I em planing to put in heli something a bit more serious like hv servos..
Wich servos you thing is maximum the Mezon 130 BEC will take care.
I know X8 are overdose but maybe something else mks have some others hv servos...?
I curently get spikes cca 3Amps wich is far from mezons limits...
What you are running on mezons ?
Thanx regards

RunarSL · 09-19-2014, 05:44 PM

I am running Align bl700/750 on my goblin 700c with the mezon130. As far as I know these servos are very hungry and demands a strond bec. The 130 has performed flawlessy so far

HSC · 09-20-2014, 05:15 AM

Well this is some good info !
Soo it seems mezon have enough power on BEC...
What kind of flight doo you have ?
Do you fly hard, soft,mild ?
Soo the MKS HBL 990/960 shuld run just fine ?
Regards

ArguZ · 09-20-2014, 03:03 PM

The Mezon BEc shuts down at 12 A
I am getting that easily with 6 Hitec HVs in a 2,2m plane and switched to a Linus HV2BEC.

But I always recommend using a buffer in a heli, even with a good BEC and fantastic servos like you are using.
GreenCaps, OptiGuard or at least a Scorpion BUG.

HSC · 10-02-2014, 02:17 PM

Hello It is mee again !

Well I have mounted servos MKS HBL 990/960 on heli set mezon bec too 8volt plug in SK 540 both of suply cables from mezon and doo some tests...

I press on the bench rotor holder arms down as much as i could and did with the radio qiuck pich movement form max to minimum angle, like pich pumps...but this servos are monsters they realy did not care much for my pressing force, with previous servos BLS 950 (MKS) i have easyli reach unsinhronus movment of servos durig the pich inputs, but with HBL 990/960 no chance...

Also my friend try put some force on tail servo...

I get max reading from Jeti Mezon bec 4,5A but this was spikes....

I was exspecting a lot more, but as much I have try I did not get bigger curent than 4,5 A.............strange
Also bec voltage was stabil spot on 8 Volts maybe 7,8 in some spikes, but no more...

With my old servos BLS 950 (MKS) and BLS 251 i have reach 3 A max in flight set to 5.8Volt, including puch pumps, daimonds, tictocs, ect...

P.S. Anybodey have idea how looks Vbar pichpump test, I have seen some post time ago about this but I can not find it anywhere.

HSC · 10-04-2014, 01:21 PM

Hello !

Today I have tested 4 baterys, all kind of stuf tictocs pichpumps piroflips piroloops, i have push my E700 prety much hard on 1900 n-1 and part of the flight on 1750 n-1....pich set to 12 deg

First I must say the feel on the sticks is werry precize and smooth...much better than old servos

The biggest diference I have noticed is smoothnes of tail and autority on the tai, also holding power was enormous, tail was spot on no matter what i doo...

Maybe someone will bee interested on this logg pics if you like too run MKS 960/990 servos on Mezon bec set too 8V...soo far ...............take a look the pics

ArguZ · 10-06-2014, 02:36 AM

Looks great

You picked some of the best servos possible, the Mezon BEC will perform just fine.
If you can program an alarm for I BEC at 10A, then you know when it gets critical.
12A and it shuts down
I am averaging the same as you with my 950/980 combo

prototype3a · 11-17-2014, 06:30 PM

I regularly hit 8A peaks on my x7 with Savox sb-2271sg's on cyclic. It's good to know it can handle up to 12A though.

09-17-2014, 04:11 PM	#1 (permalink)
HSC Registered Users Join Date: May 2006	How strong is in real Mezon 130 BEC ? Hello ewerybodey ! Curently I em running on raptor E700 MKS 950 BLS on ciclic and Futaba BLS 251 on tail... But I em planing to put in heli something a bit more serious like hv servos.. Wich servos you thing is maximum the Mezon 130 BEC will take care. I know X8 are overdose but maybe something else mks have some others hv servos...? I curently get spikes cca 3Amps wich is far from mezons limits... What you are running on mezons ? Thanx regards __________________ A je to ?

09-19-2014, 05:44 PM	#2 (permalink)
RunarSL Registered Users Join Date: Jul 2012	I am running Align bl700/750 on my goblin 700c with the mezon130. As far as I know these servos are very hungry and demands a strond bec. The 130 has performed flawlessy so far __________________ Logo 800 Xxtreme, Signature 4540, Kosmik 200, BK7001/8005, Neo Logo 690 SX v2, Scorpion 4525, Jeti Mezon 130, MKS960/BK8005, Neo Urukai Carbon, Scorpion 4530, Kosmik 160, Neo Trex 700N, TT 1.00RL, Vbar

09-20-2014, 05:15 AM	#3 (permalink)
HSC Registered Users Thread Starter Join Date: May 2006	Well this is some good info ! Soo it seems mezon have enough power on BEC... What kind of flight doo you have ? Do you fly hard, soft,mild ? Soo the MKS HBL 990/960 shuld run just fine ? Regards __________________ A je to ?

10-02-2014, 02:17 PM	#5 (permalink)
HSC Registered Users Thread Starter Join Date: May 2006	Hello It is mee again ! Well I have mounted servos MKS HBL 990/960 on heli set mezon bec too 8volt plug in SK 540 both of suply cables from mezon and doo some tests... I press on the bench rotor holder arms down as much as i could and did with the radio qiuck pich movement form max to minimum angle, like pich pumps...but this servos are monsters they realy did not care much for my pressing force, with previous servos BLS 950 (MKS) i have easyli reach unsinhronus movment of servos durig the pich inputs, but with HBL 990/960 no chance... Also my friend try put some force on tail servo... I get max reading from Jeti Mezon bec 4,5A but this was spikes.... I was exspecting a lot more, but as much I have try I did not get bigger curent than 4,5 A.............strange Also bec voltage was stabil spot on 8 Volts maybe 7,8 in some spikes, but no more... With my old servos BLS 950 (MKS) and BLS 251 i have reach 3 A max in flight set to 5.8Volt, including puch pumps, daimonds, tictocs, ect... P.S. Anybodey have idea how looks Vbar pichpump test, I have seen some post time ago about this but I can not find it anywhere. __________________ A je to ?

10-04-2014, 01:21 PM	#6 (permalink)
HSC Registered Users Thread Starter Join Date: May 2006	Hello ! Today I have tested 4 baterys, all kind of stuf tictocs pichpumps piroflips piroloops, i have push my E700 prety much hard on 1900 n-1 and part of the flight on 1750 n-1....pich set to 12 deg First I must say the feel on the sticks is werry precize and smooth...much better than old servos The biggest diference I have noticed is smoothnes of tail and autority on the tai, also holding power was enormous, tail was spot on no matter what i doo... Maybe someone will bee interested on this logg pics if you like too run MKS 960/990 servos on Mezon bec set too 8V...soo far ...............take a look the pics Attached Thumbnails __________________ A je to ?

09-20-2014, 03:03 PM	#4 (permalink)
ArguZ Registered Users Join Date: Dec 2011	The Mezon BEc shuts down at 12 A I am getting that easily with 6 Hitec HVs in a 2,2m plane and switched to a Linus HV2BEC. But I always recommend using a buffer in a heli, even with a good BEC and fantastic servos like you are using. GreenCaps, OptiGuard or at least a Scorpion BUG.

10-06-2014, 02:36 AM	#7 (permalink)
ArguZ Registered Users Join Date: Dec 2011	Looks great You picked some of the best servos possible, the Mezon BEC will perform just fine. If you can program an alarm for I BEC at 10A, then you know when it gets critical. 12A and it shuts down I am averaging the same as you with my 950/980 combo

11-17-2014, 06:30 PM	#8 (permalink)
prototype3a Registered Users My HF Map location Join Date: Jun 2006 Location: Chrisitansburg VA USA	I regularly hit 8A peaks on my x7 with Savox sb-2271sg's on cyclic. It's good to know it can handle up to 12A though. __________________ Jeti DS14us -- TT e700 -- 6s Logo600se UL -- Logo600-3d -- Logo500 UL -- Charge Case

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in