Register Now

torch8 · 11-28-2012, 09:22 AM

3GX MR is only compatible fith Futuba? I don't want to build and the Trex 450 Plus DFC looks good, but I would like to bind it to my specktrum dx6i. If this is not possilbe I will have change out to Beastx or other FBL system.

bad007 · 11-29-2012, 07:26 PM

3gx and a separate RX, BX with spek sat adapter and sat. or a AR7200BX

dwdw910 · 12-12-2012, 10:15 PM

The 3X MR stands for micro receiver. It is an all in one 3GX compact with SFHSS Futaba receiver inside. The unit is not updateable because it has no port on it though. Align has rebranded the Futaba T6J as their own Align T6.

dwdw910 · 12-12-2012, 10:17 PM

I would encourage you to look at the transfer rates of the T6J versus your transmitter. The Futaba transfers commands way faster... Smokes it.

dwdw910 · 12-12-2012, 10:29 PM

I had to look it up real quick... Its 6.8ms... There isnt another 6 channel TX that fast. Plus by the time you change out FBL systems.. you really have built a helicopter.. in that respect, you should get the Pro and build it to have the extra insane performance capability. ;-)

11-28-2012, 09:22 AM	#1 (permalink)
torch8 Registered Users Join Date: Aug 2010	3GX MR 3GX MR is only compatible fith Futuba? I don't want to build and the Trex 450 Plus DFC looks good, but I would like to bind it to my specktrum dx6i. If this is not possilbe I will have change out to Beastx or other FBL system.

11-29-2012, 07:26 PM	#2 (permalink)
bad007 Registered Users Join Date: Nov 2009	3gx and a separate RX, BX with spek sat adapter and sat. or a AR7200BX __________________ Align 450Pro 3GX, 500ESP/DFC 3GX, 500L, 550 DFC MicroBeast , Velocity 50 Vbar OS55 HZ-R, D380 DFC D420, G500 Sport Microbeast, All HW V4, X5 stretch 220 Flame Emax Bullet Force V2 VTX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-12-2012, 10:15 PM	#3 (permalink)
dwdw910 Registered Users Join Date: Dec 2012	The 3X MR stands for micro receiver. It is an all in one 3GX compact with SFHSS Futaba receiver inside. The unit is not updateable because it has no port on it though. Align has rebranded the Futaba T6J as their own Align T6.

12-12-2012, 10:17 PM	#4 (permalink)
dwdw910 Registered Users Join Date: Dec 2012	I would encourage you to look at the transfer rates of the T6J versus your transmitter. The Futaba transfers commands way faster... Smokes it.

12-12-2012, 10:29 PM	#5 (permalink)
dwdw910 Registered Users Join Date: Dec 2012	I had to look it up real quick... Its 6.8ms... There isnt another 6 channel TX that fast. Plus by the time you change out FBL systems.. you really have built a helicopter.. in that respect, you should get the Pro and build it to have the extra insane performance capability. ;-)

Register Now

Log-in