Stuck in setup 2 mode

[Braydubya]

My ikon unit initializes just fine but stays in setup 2 mode (2 flashes)
Even in software as far as wherever it says current setup
My governor modes switch from normal to idle up 2 but setup stays at 2 no matter ??
Please help

[aaronp97]

Originally Posted by Braydubya

My ikon unit initializes just fine but stays in setup 2 mode (2 flashes)
Even in software as far as wherever it says current setup
My governor modes switch from normal to idle up 2 but setup stays at 2 no matter ??
Please help

What radio do you have? make sure that whatever switch you want to use for bank switching is set to channel aux 2.
aaron

[Braydubya]

Dx9...this just started
Have had no issues till now

[Braydubya]

Thanks Aaron

For some reason in my Tx ch7 aux2 was set to inh...???
Not sure why....I flew a week ago
My bluetooth connection is giving me issues but unrelated...

I'm REALLY not sure what happened here...havent changed anything in Dx9 for this model...hmmm

Thanks again

[TJSII]

Just a thought if you are using a bluetooth connection to talk to the MSH Brain. I have my heli set up to use bank1 Sport, bank2 3D, and bank3 for beginner & self level. Via USB & a laptop I see all of the switching occurring in the software that I set up in the TX. However, if I connect to the Brain via bluetooth the mobile software does not indicate that the switching is occurring.

[zomaar]

Originally Posted by TJSII

Just a thought if you are using a bluetooth connection to talk to the MSH Brain. I have my heli set up to use bank1 Sport, bank2 3D, and bank3 for beginner & self level. Via USB & a laptop I see all of the switching occurring in the software that I set up in the TX. However, if I connect to the Brain via bluetooth the mobile software does not indicate that the switching is occurring.

+1 on this bank switching visibility is very erratic (or at least the display) on Bluetooth