START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
X7 Discussion and support of the Gaui X7 |
|
LinkBack | Thread Tools | Display Modes |
09-04-2016, 08:25 PM | #1 (permalink) |
Registered Users
Join Date: Feb 2011
|
Weird Tail Blade Noise?
hey guy's on my x7 I have some 105mm edge tails. I noticed today on a hard left or right rudder piro and stop, or a piro flip I hear this sound like blades slapping against each other. I'm serious. literally say if you have a blade in each hand and you just lightly tap 1 against the other, not edge to edge. sorry for not having video. i've visually looked it over but don't see anything out of place.
__________________
HE > me. |
Sponsored Links | |||
Advertisement |
|
09-06-2016, 07:00 AM | #2 (permalink) |
Registered Users
Join Date: Sep 2008
|
Sure comes from tail blades and not from the torque tube?
Out of curiosity, do u have the 6mm tail hub in it?
__________________
Oxy2 - Oxy 3 -Oxy 4 - Oxy 4MAX - Oxy 5 MEG - Oxy 5HF - Nitroxy -Flash700 |
09-06-2016, 03:18 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2011
|
.
not 100% sure where its coming from. that's just what it sounds like. also I did put the new 6mm shaft on the tail. does the tail on the x7 normally have a lot of gear slop in the tail?
__________________
HE > me. |
09-06-2016, 05:09 PM | #4 (permalink) | |
Registered Users
Join Date: Jul 2013
Location: Middle East
|
Quote:
I would suggest you take a good look at the whole tail drive train before flying it again please. Start with the crown gear mesh. Check this very carefully. Also check that the T-tube bearings and housings stayed in place when it was pushed in. |
|
09-06-2016, 05:21 PM | #5 (permalink) | ||
Registered Users
Join Date: Sep 2008
|
You don't want this to happen....
Yea, that's me... I had strange noise too coming from the tail.....old hub installed..and that s what happened. Make sure your TT is straight too, to have a hair of wobble is ok, but must be minimum (even though all GAUI TT are not perfectly straight out of the box). So yes, like Dawiev said, have a good look to the whole tail drive system.
__________________
Oxy2 - Oxy 3 -Oxy 4 - Oxy 4MAX - Oxy 5 MEG - Oxy 5HF - Nitroxy -Flash700 |
||
Thread Tools | |
Display Modes | |
|
|