Another 2015 Maiden

[HoffY]

hi all, yep... it only took me 4 years to finally build my Fusion 50! But here we go, i finally done it. Maiden was yesterday and i did some tweaking and changing today with some electrical routing. Tweaked some routing so i could more easily get to the servo leads for the ESC and the Vortex VX1n datapod when needed. Which i'm about to try and pull the first logs off the ESC and check out! How exciting (even though i really only hovered and then done some very light sports for another couple of mins after that lol). Some pics and a video to follow when i get the chance (just had a massive storm), just coz i can! I know not many will chime in as i'm 4 years to late.. but what the hell(i)!

[Arcturus97]

Hey dood! Welcome to the fun of Fusion. Take care of your tail gears - hard or impossible to find now.

[van-man-123]

If you are using the black tail gears i would boil them in water for 5mins to prolong there life and alsoand minimise the amount of movement in the front umbrella gear with some electrical tape in behind the bearing to minimise movement of the gear if needed in the gear case and ...........also glue the rear umbrella gear in the bearings as it will push out you will see this in the form of some marks on the brass sleeve on the tail out put shaft