START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Align 3G FBL System Align 3G FBL Flybarless System Software and Hardware Support |
|
LinkBack | Thread Tools | Display Modes |
10-24-2013, 01:41 PM | #1 (permalink) |
Registered Users
Join Date: Feb 2009
|
new to fbl got a 3g on the way.....
hey guys,
whats the best setup for a 3g on a 450 s? what servos? and can i set it up with a seperate tail gyro like my spartan? all reccomendations welcome. im just not sure waht it would take to get it flying well... |
Sponsored Links | |||
Advertisement |
|
10-24-2013, 04:04 PM | #2 (permalink) |
Registered Users
Join Date: Nov 2011
|
Find the post by Bad007 on how to set up 3G.
3G only works with digital servos. Don't plug in analog servos for cyclic, it will burn them out very quickly. No need to set it up with the separate tail gyro. 3G tail gyro is pretty decent(same as their GP750/780 gyro if not better). I forget if 3G had the tail compensation but most of the FBL gyros have integrated function to pre-compensate for the tail in cyclic pitch changes which helps with the tail. |
11-09-2013, 07:07 PM | #3 (permalink) |
Registered Users
Join Date: Aug 2011
|
I wanted to use the 3G (I have one on hand) on my Hausler 450, but pretty sure it has analog servos. Maybe a $30 copterx? I hear they support analog.
__________________
I swear these clones are supposed to fly. I saw it on youtube! |
11-10-2013, 01:54 AM | #4 (permalink) |
Registered Users
|
Yes, 3G supports analog servos, but ONLY for rudder.
For cyclic it requires digital servos, as stated nameci.
__________________
vjj TRex 700L Dominator TOP 3+3 Speed TRex 600EFL PRO DFC BL750MX w/Performance Booster |
11-10-2013, 09:13 AM | #5 (permalink) |
Registered Users
Join Date: Aug 2011
|
That's so funny because so many helis are or used to be setup with analog servos on swash and a digital tail. Guess I'll look for some cheap digital 9g servos. Well, relatively cheap. And I can give the stock ones away to a fellow member with the same heli for spares.
__________________
I swear these clones are supposed to fly. I saw it on youtube! |
11-12-2013, 04:48 PM | #6 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2009
|
setup questions?
ok so i finally got my 3g setup on my 250 with a dfc head and everything dialed in but after initialization my swash only hops up and down one time. is that an issue? i went ahead and maidened her anyway with no adverse affect, im just wondering if there is a problem being as instructions say it should go up and down three times.
|
Thread Tools | |
Display Modes | |
|
|