gov on a eclipes7 hitec

[waterbug57]

has anyone been able to get a gov to work on this radio. i have emailed hitec and thay had no answers

bob

[dxtarl]

if you are useing multigov its easy RPM select goes to Channel 5, and use the Gyro Menu to Set Ideal 1/2 like Speed 1 -- 0%, Speed 2 -- 50%, and Speed 3 -- 100% the rest is acording to the multigov manual.

[jondbennett]

I use the Eclipse.
I have a T-Rex 450 frankenstein with an Align BL35G ESC. This is the 35A ESC with the 5V BEC. It works very well.

What do you mean that "it won't work"?
What is the problem that you are having?
What helicopter are you flying?
Nitro or Electric?
More data would be helpful.

The people on this board are awesome. With more data, they will provide very useful advise. Without more data:

[waterbug57]

this is on a trex600n. if i plug into ch5 is the multigov a gyro to? because ch5 is my gyro hh %

[dxtarl]

no you will have to set up the gyro on ch7 (Switch)

[jondbennett]

I guess I am totally ignorant of Nitro ships. I thought the governor went on the throttle channel.

[Pinecone]

You can use (or may need with some) another channel to set the governed head speed. This allows you to have more than one governor setting in flight and even turn it off.

[jondbennett]

Pinecone:
Thanks for the info, I'll read-up about them.

[waterbug57]

i think i will just use the eclpise on the planks and get a dx7 for the heli's