Register Now

1nv3rt3d · 05-28-2010, 10:27 AM

Picture's by member request.

Adnan_Mokodompit · 05-29-2010, 02:59 AM

i love mine to....

with his big bro

This is my Ready To Fly armada...
Trex 600 NSP 3G (A.K.A Flying Blue Shark or Fly-Barless Shark); Trex 550E & the Notorious Copter-X 450 Black Angel...

jscarano · 06-22-2010, 10:19 PM

Is anyone gonna make a 550 pic and video dedicated section? thanks

ps can a mod make this a sticky. thanks

SpeedDemon46 · 06-23-2010, 10:47 AM

With my Blade 400

...and with my Blade mSR

TRex 550E 3G
- all stock electronics
- TRex 600 vertical stabilizer (2mm vs. 1mm stock - eliminated vibration)
- Hyperion 6S 5000mAh 45C

(Oh, and Jamin_00 - I dig your profile pic. That's what the '46' in my alias is for. Valentino Rossi is a GOD.

)

Bob O · 06-23-2010, 11:06 AM

Quote:

Originally Posted by jscarano

Is anyone gonna make a 550 pic and video dedicated section? thanks

ps can a mod make this a sticky. thanks

Good idea!

I dug up some pics and copied them here to get the thread started.

blackgunner52 · 06-23-2010, 11:36 AM

https://www.helifreak.com/album.php?albumid=5081

tada, Here it is. Still in the works. Going to add the CF Boom today (cut down 600 boom) This machine is incredable.

Silver 700 skid pipes (cut down)
600 aluminum washers (30)
gy520 gyro
microheli boom support brace
553mm edge blades
600 boom supports cut down 48mm
600 alum. stab mount
600 3k stab
Hyperion 6s 5000 35c
stock motor and esc
all wires loomed
ds650 tail servo
RCbooya canopy mounts

DenDog220 · 06-23-2010, 11:56 AM

I have some pix too...

I really love these two little Rex...

Belt250 · 06-23-2010, 12:05 PM

My 550E

bedye4 · 06-23-2010, 07:41 PM

couple pics of the new bird, and the first few flights. hope you like them!!

michael88997 · 06-23-2010, 07:55 PM

just wanted to grab the first flybarred pic

... will post more later

sawdogg73 · 06-24-2010, 02:03 PM

My T-Rex 550e 3G next to my EXI 500(about 95% T-REX) and 600esp. Still building my 550. I also have a 250 and 450PRO

rc_corner · 06-25-2010, 12:16 PM

I found the following problems while assembling this heli:

1. No grease in the tail thrust bearing.

2. Tail blades were out of balance (fixed by applying a few drops of thick CA on one blades).

3. 3G version 2.0 90-degree tail blip.

Attached are some pictures of the heli.

Adnan_Mokodompit · 06-27-2010, 04:42 AM

The Align Trex family (250 still in the box

)

side view

michael88997 · 06-30-2010, 07:14 PM

finally done with setup, now just waiting on free time :/

Wolfpackin · 07-04-2010, 05:02 PM

Here's some more 550E Flybar version pictures for your viewing pleasure.

Still haven't maidened it yet...waiting for batteries.
Enjoy!

SpeedDemon46 · 07-04-2010, 05:58 PM

Quote:

Originally Posted by Wolfpackin

Here's some more 550E Flybar version pictures for your viewing pleasure.

Still haven't maidened it yet...waiting for batteries.
Enjoy!

I don't know what's more beautiful - your 550 or the amazing background in the pictures!!

That flying space looks pretty much like heaven.

Wolfpackin · 07-04-2010, 06:35 PM

Quote:

That flying space looks pretty much like heaven.

Thanks man!

We often joke about our flying field with the million dollar view...just down the road from the county landfill.

But it is nice: no membership fee, no rules, two wind socks, a raised heli pad and some work benches.
Most days I have the place to myself.

More pictures of the place in my gallery if you're interested.

raptorz499 · 07-05-2010, 06:59 AM

I want a flyin field like that!!!

Looks great Wolf!!!

tdsounds · 07-06-2010, 12:39 AM

Man, I'm jealous. I use to fly at a field and my background was a sugarcane field.

Roger Palacio · 07-12-2010, 12:07 AM

Lets welcome the new member of my T-rex family

,

T-REX 550

DS610 cyclic
JR8900G rudder
Spartan Quark
6S Li-Po 5000mAh 45C
600M Brushless Motor
RCE-BL70G Brushless ESC
520 Carbon fiber blades
90mm 3K Carbon Fiber Tail Blades
17T pinion
2770 RPM

This machine has some sirius power.

Roger P.

05-28-2010, 10:27 AM	#1 (permalink)
1nv3rt3d Registered Users Join Date: Jan 2010	Show off your T-Rex 550 - post your pics here! Picture's by member request. __________________ 1NV3RT3D YOUTUBE HelloHeli

05-29-2010, 02:59 AM	#2 (permalink)
Adnan_Mokodompit Registered Users Join Date: Aug 2008	i love mine to.... with his big bro This is my Ready To Fly armada... Trex 600 NSP 3G (A.K.A Flying Blue Shark or Fly-Barless Shark); Trex 550E & the Notorious Copter-X 450 Black Angel... __________________ A bunch of broken, abused, beaten & doomed 450s.... The Mighty Flybarless Dust Kickin' Duo, T-Rex 550e & 600NSP Last edited by Adnan_Mokodompit; 06-23-2010 at 10:52 PM..

06-22-2010, 10:19 PM	#3 (permalink)
jscarano Registered Users Join Date: Aug 2006	Show off your T-Rex 550 - post your pics here! Is anyone gonna make a 550 pic and video dedicated section? thanks ps can a mod make this a sticky. thanks

06-23-2010, 10:47 AM	#4 (permalink)
SpeedDemon46 Registered Users My HF Map location Join Date: Feb 2009	With my Blade 400 ...and with my Blade mSR TRex 550E 3G - all stock electronics - TRex 600 vertical stabilizer (2mm vs. 1mm stock - eliminated vibration) - Hyperion 6S 5000mAh 45C (Oh, and Jamin_00 - I dig your profile pic. That's what the '46' in my alias is for. Valentino Rossi is a GOD. ) __________________ E-Flite Blades: mCX, S300, CX3, mSR, SR, 400, mCPX Align TRex 550E 3G w. KDE Direct 1907 AMA #: 948082

06-23-2010, 11:56 AM	#7 (permalink)
DenDog220 Registered Users Join Date: Nov 2009	I have some pix too... I really love these two little Rex... Attached Thumbnails

06-23-2010, 11:36 AM	#6 (permalink)
blackgunner52 Registered Users Join Date: Nov 2009	https://www.helifreak.com/album.php?albumid=5081 tada, Here it is. Still in the works. Going to add the CF Boom today (cut down 600 boom) This machine is incredable. Silver 700 skid pipes (cut down) 600 aluminum washers (30) gy520 gyro microheli boom support brace 553mm edge blades 600 boom supports cut down 48mm 600 alum. stab mount 600 3k stab Hyperion 6s 5000 35c stock motor and esc all wires loomed ds650 tail servo RCbooya canopy mounts

06-23-2010, 12:05 PM	#8 (permalink)
Belt250 Registered Users Join Date: Aug 2009	My 550E

06-23-2010, 07:41 PM	#9 (permalink)
bedye4 Registered Users Join Date: Apr 2009	couple pics of the new bird, and the first few flights. hope you like them!! Attached Thumbnails __________________ Blade 400, Zippy 2200 20C 3s, Hitec 65hb Cyclic and Tail, GY401 Align T-Rex 500 CF - 9257 cyclics, 9650 tail, GP750, zippy packs (2650, 3000) "The Leader Who Stays in the Rear, Takes it in the Rear"

06-23-2010, 07:55 PM	#10 (permalink)
michael88997 Registered Users Join Date: Mar 2008 Location: Denton, TX	just wanted to grab the first flybarred pic ... will post more later Attached Thumbnails

06-24-2010, 02:03 PM	#11 (permalink)
sawdogg73 Registered Users Join Date: Dec 2009	MY T-REX FAMILY My T-Rex 550e 3G next to my EXI 500(about 95% T-REX) and 600esp. Still building my 550. I also have a 250 and 450PRO Attached Thumbnails

06-25-2010, 12:16 PM	#12 (permalink)
rc_corner Registered Users Join Date: Sep 2009	Three Problems Found I found the following problems while assembling this heli: 1. No grease in the tail thrust bearing. 2. Tail blades were out of balance (fixed by applying a few drops of thick CA on one blades). 3. 3G version 2.0 90-degree tail blip. Attached are some pictures of the heli. Attached Thumbnails

06-27-2010, 04:42 AM	#13 (permalink)
Adnan_Mokodompit Registered Users Join Date: Aug 2008	The Align Trex family (250 still in the box ) side view __________________ A bunch of broken, abused, beaten & doomed 450s.... The Mighty Flybarless Dust Kickin' Duo, T-Rex 550e & 600NSP

06-30-2010, 07:14 PM	#14 (permalink)
michael88997 Registered Users Join Date: Mar 2008 Location: Denton, TX	finally done with setup, now just waiting on free time :/ Attached Thumbnails

07-04-2010, 05:02 PM	#15 (permalink)
Wolfpackin HF Support My HF Map location Join Date: Nov 2007	Here's some more 550E Flybar version pictures for your viewing pleasure. Still haven't maidened it yet...waiting for batteries. Enjoy! __________________ Jonathan Livingston Helicopter Blade 400: E-flite 420H/35X ESC, AR6100e, HS65HB x 3, G401B/DS290G. (Ret.) CopterX 450AE V2: 430XL/35X ESC, AR6100, HS65HB x 3, LTG2100T/HSG-5084MG. T-Rex 550E V1 Classic Flybar: 600MX/BL70G, AR6200, DS610 x 3, Quark/DS650, 16t/520mm blades.

07-05-2010, 06:59 AM	#18 (permalink)
raptorz499 Registered Users Join Date: Feb 2008	I want a flyin field like that!!! Looks great Wolf!!!

07-06-2010, 12:39 AM	#19 (permalink)
tdsounds Registered Users Join Date: Aug 2006	Man, I'm jealous. I use to fly at a field and my background was a sugarcane field.

07-12-2010, 12:07 AM	#20 (permalink)
Roger Palacio Registered Users Join Date: May 2008	Here it's Mine Lets welcome the new member of my T-rex family , T-REX 550 DS610 cyclic JR8900G rudder Spartan Quark 6S Li-Po 5000mAh 45C 600M Brushless Motor RCE-BL70G Brushless ESC 520 Carbon fiber blades 90mm 3K Carbon Fiber Tail Blades 17T pinion 2770 RPM This machine has some sirius power. Roger P. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in