Register Now

chrisconn2 · 10-22-2009, 07:18 AM

Is someone selling the CB 100 head to retrofit on a 4#3b ?

Steve Joblin · 10-22-2009, 08:19 PM

I don't think you can easily swap out the head... It would be a dumb design move on Walkera's part to allow everyone to change their 4#3B to a CB100 just by buying a new head. I am not 100% for sure, but I don't think it is possible.

EQMOD · 10-22-2009, 09:01 PM

although you can emulate one by converting the 4#3B to a bell head configuration. With such setup though will reduce the 4#3B's agile response and will make it fly more "coaxlike"

http://www.rcgroups.com/forums/showthread.php?t=1100898

EQMOD · 10-22-2009, 09:05 PM

or you can take it a step further;

http://www.rcgroups.com/forums/showthread.php?t=1127123

with the fully functional flybar paddles;

chrisconn2 · 10-23-2009, 02:32 PM

Thanks , a retrofit would make life to easy.

kelley · 10-26-2009, 02:18 PM

It looks like it can be done with a simple swash mod. Here is some information I ran across. I just ordered the parts and will let you know how it goes.

10-22-2009, 07:18 AM	#1 (permalink)
chrisconn2 Registered Users Join Date: Nov 2008	CB 100 HEAD Is someone selling the CB 100 head to retrofit on a 4#3b ? __________________ Nailed the $20 landing , now what ?

10-23-2009, 02:32 PM	#5 (permalink)
chrisconn2 Registered Users Thread Starter Join Date: Nov 2008	CB 100 HEAD Thanks , a retrofit would make life to easy. __________________ Nailed the $20 landing , now what ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2009, 08:19 PM	#2 (permalink)
Steve Joblin Registered Users My HF Map location Join Date: Aug 2008	I don't think you can easily swap out the head... It would be a dumb design move on Walkera's part to allow everyone to change their 4#3B to a CB100 just by buying a new head. I am not 100% for sure, but I don't think it is possible.

10-22-2009, 09:01 PM	#3 (permalink)
EQMOD Join Date: May 2008	although you can emulate one by converting the 4#3B to a bell head configuration. With such setup though will reduce the 4#3B's agile response and will make it fly more "coaxlike" http://www.rcgroups.com/forums/showthread.php?t=1100898

10-22-2009, 09:05 PM	#4 (permalink)
EQMOD Join Date: May 2008	or you can take it a step further; http://www.rcgroups.com/forums/showthread.php?t=1127123 with the fully functional flybar paddles;

10-26-2009, 02:18 PM	#6 (permalink)
kelley Registered Users Join Date: Apr 2008	It looks like it can be done with a simple swash mod. Here is some information I ran across. I just ordered the parts and will let you know how it goes.

Register Now

Log-in