Register Now

glb60 · 08-06-2007, 06:04 PM

Went to lhs this day with same problem sm set screws! they gave me replacements for defective paddles.
Dick
Need the res of the vid to finish my 600 nitro

Finless · 08-06-2007, 06:31 PM

Quote:

Need the res of the vid to finish my 600 nitro

Unfortunatly I wont be able to restart them until after IRCHA and will restart on Tuesday 8/14. Sorry but my real job got in the way of me doing some more vids before then

I took the day off Tuesday after IRCHA specifically to get a BUNCH of vids done so please hang in there.

Bob

scadaboy · 08-07-2007, 12:58 PM

Dragonus II Plus build? - Bob, I believe you have way too much on the go

:alcohol:alcoholTrex600 Nitro Pro builder waiting patiently.................:alcohol

electricdurango · 08-11-2007, 11:20 AM

I opted for the standard. Bought a metal tail case even though not necessary. Flies awsome and I dont even have a gallon threw it yet. I just leaned it out some,but still ways to go.

DeanK · 08-13-2007, 06:54 AM

Finless, it would be great if you could make a video on how to properly break in and maintain a nitro engine for newbs like me who never had a nitro heli before.

Finless · 08-13-2007, 04:09 PM

Quote:

Originally Posted by DeanK

Finless, it would be great if you could make a video on how to properly break in and maintain a nitro engine for newbs like me who never had a nitro heli before.

I plan to do that in this series.

Bob

Piranha · 08-14-2007, 03:02 PM

Thank you Bob ONCE AGAIN!!!
I came back from my vacations and 600 Basic kit is also here!!!
I have already pass through all 5 steps ang waiting MORE!!!

Thank you MAN

DeanK · 08-15-2007, 07:50 PM

Quote:

Originally Posted by Finless

I plan to do that in this series.

Bob

Great thanks!

Finless · 08-20-2007, 10:46 AM

Folks, due to the data loss last night some of my links to the video segments I did Saturday are gone. I wiont be able to fix them until later this afternoon.

Standby I will have them fixed as soon as I can.

Bob

wicked_n_raw · 08-20-2007, 02:40 PM

Great work once again Bob.

I convert all the vids I need to DVD so I could watch it on the big tv in my workshop. i just got the Trex 600n, and can't wait to start the build.

Keep them coming.

Finless · 08-20-2007, 02:51 PM

OK I fixed the links to vid steps 6 and 7 that were erased due to the data loss.

Enjoy,
Bob

fury · 08-20-2007, 05:14 PM

Finless - Do you know what tail servo you are goint use yet?

Enjoying the vids - fantastic as always

Finless · 08-20-2007, 05:27 PM

Quote:

Originally Posted by fury

Finless - Do you know what tail servo you are goint use yet?

Enjoying the vids - fantastic as always

Yes I will be using a 601 gyro which comes with a 9256.

Bob

fury · 08-20-2007, 06:08 PM

Quote:

Originally Posted by Finless

Yes I will be using a 601 gyro which comes with a 9256.

Bob

Cool thanks :-)

EddieNewYork · 08-20-2007, 08:50 PM

Hey Bob, thanks... downloading 6 and 7 now! Don't mean to jump the gun but the supplied screws for the servos don't fit the brass inserts (eyelet). Can we mount the servos without those things?

mjkeller · 08-21-2007, 08:23 AM

Not sure where to post, but this seemed the most on-topic.
I'm trying to find out what starter shaft will fit the Nitro 600. What size shaft is it and do you know any companies who make them? I'm trying to prepare for the heli, even though I can't get it yet.
Thanks!

Finless · 08-21-2007, 09:30 AM

You can use a standard starter shaft like those for the Raptor etc. Very common starter shaft. The Trex600N has a one way on the start shaft so you dont need an expensive starter shaft with a one way clutch in it. The straight cheapo $17 Raptor starter shaft will do just fine!

Bob

helical · 08-21-2007, 12:19 PM

Quote:

Originally Posted by EddieNewYork

Hey Bob, thanks... downloading 6 and 7 now! Don't mean to jump the gun but the supplied screws for the servos don't fit the brass inserts (eyelet). Can we mount the servos without those things?

I'll try to help you here....
They're meant to limit the amount of "crush" that the screw imparts on the rubber grommet. They help provide the correct amount of vibration protection to the servo from the frame while still holding the servo secure. You don't need them if you are careful not to torque the screws so tightly that you crush the grommet completely (which would practically negate the grommet's damping ability).

Mikee · 08-21-2007, 02:33 PM

I love the vids ...... And I have'nt got a 600 rex........ but if I do get one I'll have all the info I need

Don't ever stop making the vids... they are so informative and enjoyable to watch

Mikee (UK)

aamwood · 08-21-2007, 05:39 PM

Finless, thanks for the video. I just finished downoading no 6 and 7. I have Revmax . Are you going to explain how to program it using 9 channel futaba radio ? I am new to governor. Thanks Sir.

08-07-2007, 12:58 PM	#43 (permalink)
scadaboy Registered Users Join Date: May 2006	Dragonus II Plus build? - Bob, I believe you have way too much on the go :alcohol:alcoholTrex600 Nitro Pro builder waiting patiently.................:alcohol __________________ Scadaboy Trex 450SE V1 Trex 600N Pro - OS 50 Hyper - Futaba 7CHP - GY611

08-20-2007, 10:46 AM	#49 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	Folks, due to the data loss last night some of my links to the video segments I did Saturday are gone. I wiont be able to fix them until later this afternoon. Standby I will have them fixed as soon as I can. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

08-20-2007, 02:40 PM	#50 (permalink)
wicked_n_raw Registered Users My HF Map location Join Date: Apr 2004	Great work once again Bob. I convert all the vids I need to DVD so I could watch it on the big tv in my workshop. i just got the Trex 600n, and can't wait to start the build. Keep them coming. __________________ Best Regards Furron MKS USA, Pulse Ultra, Canomod

08-20-2007, 02:51 PM	#51 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	OK I fixed the links to vid steps 6 and 7 that were erased due to the data loss. Enjoy, Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

08-20-2007, 05:14 PM	#52 (permalink)
fury Registered Users Join Date: Nov 2006	Finless - Do you know what tail servo you are goint use yet? Enjoying the vids - fantastic as always __________________ X-Cell Fury 60 Expert Hirobo Sceadu 30 Align T-Rex 500 ESP RC budget, £100 per week, time spent building and flying, priceless!

08-06-2007, 06:04 PM	#41 (permalink)
glb60 Join Date: Aug 2007	Went to lhs this day with same problem sm set screws! they gave me replacements for defective paddles. Dick Need the res of the vid to finish my 600 nitro

08-11-2007, 11:20 AM	#44 (permalink)
electricdurango Registered Users Join Date: Mar 2006	I opted for the standard. Bought a metal tail case even though not necessary. Flies awsome and I dont even have a gallon threw it yet. I just leaned it out some,but still ways to go.

08-13-2007, 06:54 AM	#45 (permalink)
DeanK Registered Users Join Date: Dec 2006	Finless, it would be great if you could make a video on how to properly break in and maintain a nitro engine for newbs like me who never had a nitro heli before.

08-14-2007, 03:02 PM	#47 (permalink)
Piranha Registered Users My HF Map location Join Date: Jun 2006	Thank you Bob ONCE AGAIN!!! I came back from my vacations and 600 Basic kit is also here!!! I have already pass through all 5 steps ang waiting MORE!!! Thank you MAN

08-20-2007, 08:50 PM	#55 (permalink)
EddieNewYork Registered Users Join Date: May 2006	Hey Bob, thanks... downloading 6 and 7 now! Don't mean to jump the gun but the supplied screws for the servos don't fit the brass inserts (eyelet). Can we mount the servos without those things?

08-21-2007, 08:23 AM	#56 (permalink)
mjkeller Registered Users Join Date: Aug 2007	Not sure where to post, but this seemed the most on-topic. I'm trying to find out what starter shaft will fit the Nitro 600. What size shaft is it and do you know any companies who make them? I'm trying to prepare for the heli, even though I can't get it yet. Thanks!

08-21-2007, 09:30 AM	#57 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	You can use a standard starter shaft like those for the Raptor etc. Very common starter shaft. The Trex600N has a one way on the start shaft so you dont need an expensive starter shaft with a one way clutch in it. The straight cheapo $17 Raptor starter shaft will do just fine! Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

08-21-2007, 02:33 PM	#59 (permalink)
Mikee Registered Users Join Date: May 2007	I love the vids ...... And I have'nt got a 600 rex........ but if I do get one I'll have all the info I need Don't ever stop making the vids... they are so informative and enjoyable to watch Mikee (UK)

08-21-2007, 05:39 PM	#60 (permalink)
aamwood Registered Users Join Date: Oct 2006	Finless, thanks for the video. I just finished downoading no 6 and 7. I have Revmax . Are you going to explain how to program it using 9 channel futaba radio ? I am new to governor. Thanks Sir.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in