making an esky cp FBL?

[rsouder]

I was wondering if there was a way to make the esky belt cp and if there is, are there any suggestions?

[TheKingPhisher]

I think you just need to buy a flybarless head to replace the stock head.

[jperkosk]

You'll need fbl head and fbl controller. Also, you won't be able to do it with a stock Esky radio, so you'll need a computerized Tx (if you don't have it already) and compatible Rx/satelites, depending on Tx and fbl controller used.

[helimaniac88]

I have a unflown belt cpx and the 300 size motor tail cp one i bought when i first got into thehobby and wasupgrading from fp.......then the1st mcpx came out and i never looked back to flybars. I was looking at them the other day thinking of a way to cheaply make them flyable (fir me that requires fbl)
What i came up with is the following;
Hobby king 450 fbl head (one with the whole assembly incl linkage and swash). $28.
And the turnigy fbl unit 49.
Satelite orange unit $20
Thats $100.00 bucks, but probably makes fir a pretty good unit.
The plan b would be a spare walkera rx fbl from v120d02 and the same head. Maybe i will try that first, since i haveseveral of them and so could start with just buying the head. The servo set up requires more messing around though. So i may never get it flying. There areseveral threads on using the walkera rx fbl receivers on 450 clones, and they get pretty decent outcomes.