START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Spartan Vortex Spartan RC - Vortex VX1 Factory Support Forum |
|
LinkBack | Thread Tools | Display Modes |
04-20-2014, 08:09 AM | #1 (permalink) |
Registered Users
Join Date: Jul 2010
|
throttle curve help
ok so ive just finished my setup after the firmware update and going through final settings in my transmitter, now for my throttle curves i useually run normal as a linier set up 0-100 so when i bring the stick down the gov cuts out idle 1 and 2 are useually a flat line at 50% so the gove doesnt cut out but the problem im having is that when i alter the curve for normal it is changing all of them including hold, now im sure im missing something simple,, the radio is a jr pcm9x 11
|
Sponsored Links | |||
Advertisement |
|
04-20-2014, 08:37 AM | #2 (permalink) |
Member
|
Sounds like a transmitter issue, nick. Sorry, I'm not familiar with that transmitter.
Wait a minute, I just googled that radio and it looks like the 9303 I had. I'm not sure I follow what you're saying, as Throttle Hold doesn't have a Curve.
__________________
):> |
04-20-2014, 10:52 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jul 2010
|
yes bob its the same as the 1 in you vortex set up vids, ok forget hold that was my mistake, my bird is nitro so i use the vortex gov which engages at about 30% throttle when using a linier throttle curve 0-100 which is how i have it for normal mode but idle 1 and 2 i dont want the gov to dissengage if i go below 30% throttle,, therefore i set the curve for idle 1 and 2 as a flat line straight accross at 50% so the gov doesnt shut off and the prob im having is what ever curve i set in either flightmode N, 1 or 2 puts the same curve in the other 2
|
04-20-2014, 11:21 AM | #4 (permalink) | |
Member
|
Quote:
Unless there's something in Device Select for flight modes that makes it work the way you've described?
__________________
):> |
|
04-20-2014, 11:42 AM | #5 (permalink) |
Member
|
Nick,
Can you take a vid of your transmitter screen and talk us through what you've described so we can see what's going on? I just went through an online manual for the 9303 and didn't see anything that would make an adjustment for one throttle curve apply to all throttle curves.
__________________
):> |
04-20-2014, 01:06 PM | #6 (permalink) |
Registered Users
Thread Starter
Join Date: Jul 2010
|
well looks like ive got it sorted thx bob ,,just me being a dumbass again,,keep thinking this radio works like my old one
|
Thread Tools | |
Display Modes | |
|
|