Fun, Learning, Friendship and Mutual Respect START  HERE
Register FAQ PM Events Groups Blogs Calendar Mark Forums Read


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Kontronik Drives
Reload this Page kosmik 200 shutting down on G700


Kontronik Drives Jazz and Jive ESC's and other Kontronik equipment support


Reply
 
LinkBack Thread Tools Display Modes
Old 11-30-2014, 02:50 PM   #1 (permalink)
Registered Users
 
Posts: 2,799
 

Join Date: Dec 2012
Default kosmik 200 shutting down on G700
Put in a few flights today on my new 200hv which came as a replacement from Germany. Had 4 successful flights and then I had a shutdown... #10 motor power limit reached. This is the log from it...

Checked out the LEDs on the kosmik after I landed and they were not lit. Unplugged and let sit about an hour then tried to spool up. Motor just cogged... Wouldn't spool up. Now I'm home and tried to spool it on the bench. Now I get selftest error #43 no motor connected. Any ideas?

The only change I made was swapping out my old kosmik 160 with a 200, and going up 2 teeth on my motor pulley. Setup is as follows...

G700 competition
Scorp. 4530-450
7s pulse 450045c
24t motor pulley
Torq 9280/9288
Kosmik 200
Mini V
690mm blades

I am running a goblin speed with the exact setup except for the motor and blades... Scorp. 4535-450 and rail 716 and no issues whatsoever

Any ideas???
__________________
Tri$tate 3D | BK Servo | Switch Blades | HeliDirect | Canomod
cjpainten is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 11-30-2014, 03:39 PM   #2 (permalink)
Registered Users
 
Posts: 2,799
Thread Starter Thread Starter
 

Join Date: Dec 2012
Default
Solved:

Bad solder joint on motor wires...
__________________
Tri$tate 3D | BK Servo | Switch Blades | HeliDirect | Canomod
cjpainten is offline        Reply With Quote Quick reply to this message
Old 11-30-2014, 04:50 PM   #3 (permalink)
Registered Users
 
Posts: 3,321
 

Join Date: May 2011
Default
Quote:
Originally Posted by cjpainten View Post
Solved:

Bad solder joint on motor wires...
Yea my guess is you pushed it a little harder than normal that day and the cold solder joint melted and disconnected.
__________________
Richard Zappe
Team Kontronik USA PeakAircraft
Wh1teAfr1can is offline        Reply With Quote Quick reply to this message
Reply



« Previous Thread | Next Thread »

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
 Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright - Advertising - Contact Us - HeliFreak.com - Privacy Statement - Top

SEO by vBSEO 3.6.1