Can't get new 3G to work - help!

[FrozenOne]

Thanks for the heads up on the cable issues. Checked mine and both appear to be fine.

600N
AR7100
8717 @ 2S Lipo Cyclic
8900G Rudder/Throttle @ 5.2v

Working all the servo's and stalling them on the bench I was only able to hit peaks of 5 Amps using an Eagle tree recorder. I ran this setup with the SK360 and so far I'm loving the 3G. Can't wait for nice weather to fly it. I have no doubts it will perform as all the respectable pilots have stated it does.

[jetblue2135]

I may have received a faulty unit, just setting it up everything is plugged in and I cant get it to power up at all! I did notice that the sensor wires from the box to the gyro seem to be the opposite of all the other pics I am seeing here. My yellow wire is on the opposite side of everyone else's both going into the gyro and the box.

I just switched the polarities around on both ends of the cable to match everyone else's and still no lights no nothing when I try to power it up. Im guessing its dead. Great.