Register Now

cbagley25 · 10-22-2012, 11:49 AM

My gear spins freely but when i turn the main blades it willn't turn it's like it's locked up i think it has sumthing to do with the belt being that i have to keep pullng it back to keep it tight advice needed thanks in advance

Laughingstill · 10-22-2012, 12:06 PM

I don't understand what you mean, are you saying that one way it spins freely and the other way it does not???

Ricci · 10-22-2012, 12:32 PM

This happened once to me when I mounted the main gear (with the one-way) upside down...

Ricci.

maarset · 10-22-2012, 03:47 PM

Did you assemble this Logo new?
From your previous posts it seems like you have a bunch of drag on the drive/belt system.

Can you spin the main blades with your hand? Do they rotate a couple of times on their own?

John-NYC · 10-24-2012, 05:59 PM

Stick with your first post and have people reply, dont keeping starting new ones. it get confusing for everyone to help you.

cbagley25 · 10-24-2012, 09:45 PM

Yes I built it brand new and yes they do spin freely

maarset · 10-25-2012, 03:13 PM

So your GOOD TO GO

10-22-2012, 11:49 AM	#1 (permalink)
cbagley25 Registered Users Join Date: May 2012	gear is locked up My gear spins freely but when i turn the main blades it willn't turn it's like it's locked up i think it has sumthing to do with the belt being that i have to keep pullng it back to keep it tight advice needed thanks in advance

10-24-2012, 05:59 PM	#5 (permalink)
John-NYC Registered Users Join Date: Nov 2007	Stick with your first post and have people reply, dont keeping starting new ones. it get confusing for everyone to help you. __________________ Logo 500SE 451's - 251 4025-890kv 603mm Mini V-Bar 8s4000 Jive 80HV Align T-Rex 500ESP Mini-V Bar

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2012, 12:06 PM	#2 (permalink)
Laughingstill Registered Users Join Date: Sep 2006	I don't understand what you mean, are you saying that one way it spins freely and the other way it does not???

10-22-2012, 12:32 PM	#3 (permalink)
Ricci Registered Users Join Date: Dec 2007	This happened once to me when I mounted the main gear (with the one-way) upside down... Ricci.

10-22-2012, 03:47 PM	#4 (permalink)
maarset Registered Users My HF Map location Join Date: Feb 2008	Did you assemble this Logo new? From your previous posts it seems like you have a bunch of drag on the drive/belt system. Can you spin the main blades with your hand? Do they rotate a couple of times on their own?

10-24-2012, 09:45 PM	#6 (permalink)
cbagley25 Registered Users Thread Starter Join Date: May 2012	Yes I built it brand new and yes they do spin freely

10-25-2012, 03:13 PM	#7 (permalink)
maarset Registered Users My HF Map location Join Date: Feb 2008	So your GOOD TO GO

Register Now

Log-in