Get the real genuine 2.4 update here

[DavidH]

http://2.4gigahertz.com:80/downloads/downloads.html

http://www.futaba-rc.com/sellsheets/index.html

Also on the Futaba Flyers Club website.

from the Futaba RC website.

Please note: our software engineers are currently coding additional software which will further optimize the use of your TM-14 module. The completion date is expected to be January 08, 2008. We suggest that you once again update the software at that time to take advantage of the latest optimization.


David

[alex.venom]

Thanks, David! ;-)

[jonylien]

if I use G3 5014 0r 5114 Rx, It nesesaire update?????

Tks ur answer.

[DavidH]

The updates are so you could use the 2.4 ghz modules and receivers. You do not need the updates to use 72 mhz or other bands.

David

[jonylien]

Dear David,
Tks
Jony

[OKerbaul]

Originally Posted by DavidH

Please note: our software engineers are currently coding additional software which will further optimize the use of your TM-14 module. The completion date is expected to be January 08, 2008. We suggest that you once again update the software at that time to take advantage of the latest optimization.

Hi David,
Any news about this optimization? Thanks.
Cheers
Olivier

[DavidH]

Yep, the update is on the websites. dated 1/7/08

David

[OKerbaul]

Thanks David.

[R-4-L]

is this update affects only the Futaba 2.4Ghz ? or both spektrum and futaba modules?

[DellGattoGrande]

Hello gents!

i got my 14mz 2.4 modul and its looks like i need to have this latest update..

but is there any pdf or text "how to" so i can read it??

what to copy in the card and hot to perform it...


thanx in advance for any info

[DellGattoGrande]

got it

http://www.14mz.com/faq/faq-14mz-q864.html

[R-4-L]

take off the MODEL folder from the card and backit up somewhere on your pc.

Put the folder UPDATE in the card

Turn the little update switch (beside the card slot on my 12z)

insert the card into the radio and power up

the update should commence

when completed, take off the card and delete the update folder, put back your MODEL folder and turn the switch back to normal position.

Be sure your battery is charged though.

PS. This is all according to my 12z instructioons, but 14mz should be no different.

[R-4-L]

oh u found it, ok good luck

[bdmcobra]

I have been having problems with my sprectrum module in my 14mz. The elevator and rudder servos are getting mixed somehow. put the pcm back in and everything is fine. Could this update help with this?

[DavidH]

Originally Posted by bdmcobra

I have been having problems with my sprectrum module in my 14mz. The elevator and rudder servos are getting mixed somehow. put the pcm back in and everything is fine. Could this update help with this?

No the update will not correct any problems that are being seen when using a Spektrum brand 2.4ghz module in a Futaba 14MZ.

The update is for using Futaba 2.4 ghz module and receivers with the 14MZ.

David

[321]

So what is the latest software update for the 12Z? Mine hasn't been updated since it was converted to 2.4, a long time ago already. I guess if I had a 14MZ then I could go to the Flyers Club site and find out for myself, LOL.

[naif_r/c]

thanks very much....
I try 2 days..asked all friends and check all most website..but nothing..
but from you only 5 minutes..
I update my remote..
thanks..