Register Now

tracker640 · 02-08-2010, 05:18 PM

HEIM,
are the production versions available yet? If so let me know how I can get a set. If not, add me to the waiting list.

ross_badger · 02-08-2010, 08:27 PM

Heim:

Count me in as well for the Chinese weights and the spacer upgrade!

Justin Stuart · 04-10-2010, 09:40 AM

Is HeimJoint still around? I PM'd him and also sent him an email but got no response. I'm looking to buy one of his Trex 250 t/r sets.

rsmheli · 04-10-2010, 11:53 AM

Quote:

Originally Posted by Justin Stuart

Is HeimJoint still around? I PM'd him and also sent him an email but got no response. I'm looking to buy one of his Trex 250 t/r sets.

I just got a couple 250 sets from him about 3 weeks ago.
Very much worrth the short time to install. My blade grips are slop free now.
Tail is working perfect.

Justin Stuart · 04-10-2010, 01:18 PM

I hope he will PM me or email me. I'd like to pick up a few sets as well from him.

ross_badger · 04-11-2010, 07:21 AM

Quote:

Originally Posted by Justin Stuart

I hope he will PM me or email me. I'd like to pick up a few sets as well from him.

The easiest way to contact Heim is by e-mail: robrenz@frontiernet.net

Justin Stuart · 04-11-2010, 08:48 AM

Thanks for the info, but I already emailed him at that address. Maybe he's busy?

HEIM JOINT · 04-15-2010, 09:38 AM

Sorry guys, I have been super busy with real work. I have not been on for weeks, I will catch up.

Justin Stuart · 04-15-2010, 09:45 AM

Heim is back. Alright!!

Paulieb1979 · 04-20-2010, 07:41 PM

not sure if you got my pms but i sent you pm for order and i get a reply of the order list right away please let me know if you got my request

Justin Stuart · 04-20-2010, 09:02 PM

I put the Heim Joint tail spacer set in my Trex 250SE today and flew it. The tail is MUCH better now.

s0laris · 05-09-2010, 12:05 AM

how much is the set ?

hga77 · 05-14-2010, 12:56 AM

Quote:

Originally Posted by Justin Stuart

I put the Heim Joint tail spacer set in my Trex 250SE today and flew it. The tail is MUCH better now.

Where did you get those from?

EDIT: What a stupid question... by yours truly

HEIM JOINT · 05-15-2010, 06:51 AM

Quote:

Originally Posted by s0laris

how much is the set ?

Chinese weights are $16.50 a set
The T250 tail blade grip bearing preload spacer set is $5.99
The Torx T5 wrench for the screws in the preload spacer set only is $3.29
PM me to order

stevenpph · 05-26-2010, 02:11 AM

Does anyone know if it's better to use the Boca bearings or the Gaui bearings for this mod? A few pages back in this thread someone mentioned that the Align 681 tail bearings are somewhat lower quality - I wonder if these are made by Boca??? Strange how Align's part number is close to the Boca bearing part number.

HEIM JOINT · 05-26-2010, 12:57 PM

Quote:

Originally Posted by stevenpph

Does anyone know if it's better to use the Boca bearings or the Gaui bearings for this mod? A few pages back in this thread someone mentioned that the Align 681 tail bearings are somewhat lower quality - I wonder if these are made by Boca??? Strange how Align's part number is close to the Boca bearing part number.

The numer is the same because it is the industry standard number for that bearing size. The only reason I suggested the Gaui bearings initialy was because a lot of the tail stickyness went away when I used them instead of the Align bearings. I dont think Boca actualy makes any bearings they are just a very good distributor who has many bearings made to thier specs. Just keep in mind that you can get that bearing for anywhere from $0.89 to $12.95 and the quality varies accordingly.

s0laris · 05-26-2010, 03:25 PM

as it stands my 250 stock se tails holds perfect with the larger innolab servo on it..
Zero zero issues

aussiemick · 05-26-2010, 07:50 PM

I am in the process of getting new weights for my 250, the old ones needed replacing after lots of crash repairs.

The heli flies terribly with out the weights on a stock V1 tail set with 2 bearings and Heim Joints bearing spacer adjusting system. Servo HSG-5084MG, I may have to put my 9257 back on in the interim

Hopefully I wont have to put up with the tail as it is now for much longer.

Mick

precV · 07-06-2010, 12:21 AM

I understand that the newer Align "weighted" grips that come with the 250SE (H25095A) do not reduce pushrod force very much and that the older grips with the chinese weights are preferred.

My question is do I have to buy the old grips to use HJ's chinese weights or is there a special set that is designed for the new grips? What is the effect of using the weights with the new grips?

-John

Justin Stuart · 07-06-2010, 12:45 AM

I'm not sure if HJ's Chinese weights will fit the new grips since they already have weights on them?

04-10-2010, 09:40 AM	#183 (permalink)
Justin Stuart Registered Users Join Date: Mar 2008	Is HeimJoint still around? I PM'd him and also sent him an email but got no response. I'm looking to buy one of his Trex 250 t/r sets. __________________ Avant RC Scorpion Power Systems ThunderPower RC Kontronik Drives

04-10-2010, 01:18 PM	#185 (permalink)
Justin Stuart Registered Users Join Date: Mar 2008	I hope he will PM me or email me. I'd like to pick up a few sets as well from him. __________________ Avant RC Scorpion Power Systems ThunderPower RC Kontronik Drives

04-11-2010, 08:48 AM	#187 (permalink)
Justin Stuart Registered Users Join Date: Mar 2008	Thanks for the info, but I already emailed him at that address. Maybe he's busy? __________________ Avant RC Scorpion Power Systems ThunderPower RC Kontronik Drives

04-15-2010, 09:45 AM	#189 (permalink)
Justin Stuart Registered Users Join Date: Mar 2008	Heim is back. Alright!! __________________ Avant RC Scorpion Power Systems ThunderPower RC Kontronik Drives

04-20-2010, 07:41 PM	#190 (permalink)
Paulieb1979 Registered Users Join Date: May 2008	not sure if you got my pm not sure if you got my pms but i sent you pm for order and i get a reply of the order list right away please let me know if you got my request

02-08-2010, 05:18 PM	#181 (permalink)
tracker640 Registered Users Join Date: Feb 2008	HEIM, are the production versions available yet? If so let me know how I can get a set. If not, add me to the waiting list.

02-08-2010, 08:27 PM	#182 (permalink)
ross_badger Registered Users Join Date: Feb 2009	Heim: Count me in as well for the Chinese weights and the spacer upgrade!

04-15-2010, 09:38 AM	#188 (permalink)
HEIM JOINT Registered Users Thread Starter My HF Map location Join Date: Jan 2008	Sorry guys, I have been super busy with real work. I have not been on for weeks, I will catch up.

04-20-2010, 09:02 PM	#191 (permalink)
Justin Stuart Registered Users Join Date: Mar 2008	I put the Heim Joint tail spacer set in my Trex 250SE today and flew it. The tail is MUCH better now. __________________ Avant RC Scorpion Power Systems ThunderPower RC Kontronik Drives

05-09-2010, 12:05 AM	#192 (permalink)
s0laris Registered Users Join Date: Sep 2006	how much is the set ? __________________ Team Fun / Heli Canada When you start to be in complete control reflexes are not a requirement.

05-26-2010, 02:11 AM	#195 (permalink)
stevenpph Registered Users Join Date: Feb 2010	Boca Bearings Does anyone know if it's better to use the Boca bearings or the Gaui bearings for this mod? A few pages back in this thread someone mentioned that the Align 681 tail bearings are somewhat lower quality - I wonder if these are made by Boca??? Strange how Align's part number is close to the Boca bearing part number.

05-26-2010, 03:25 PM	#197 (permalink)
s0laris Registered Users Join Date: Sep 2006	as it stands my 250 stock se tails holds perfect with the larger innolab servo on it.. Zero zero issues __________________ Team Fun / Heli Canada When you start to be in complete control reflexes are not a requirement.

05-26-2010, 07:50 PM	#198 (permalink)
aussiemick Registered Users My HF Map location Join Date: Jul 2006	I am in the process of getting new weights for my 250, the old ones needed replacing after lots of crash repairs. The heli flies terribly with out the weights on a stock V1 tail set with 2 bearings and Heim Joints bearing spacer adjusting system. Servo HSG-5084MG, I may have to put my 9257 back on in the interim Hopefully I wont have to put up with the tail as it is now for much longer. Mick __________________

07-06-2010, 12:21 AM	#199 (permalink)
precV Registered Users My HF Map location Join Date: Jun 2008	250SE - I understand that the newer Align "weighted" grips that come with the 250SE (H25095A) do not reduce pushrod force very much and that the older grips with the chinese weights are preferred. My question is do I have to buy the old grips to use HJ's chinese weights or is there a special set that is designed for the new grips? What is the effect of using the weights with the new grips? -John __________________ T-Rex 500 CF / Hyperion HS3026-1600 / ICE75 / JR Z3650 / JR 3500G / JR 770D / AR7000 T-Rex 250 SE / DS410 / DS09GMD / GP750 / AR6110 / Hyperion G3 850 T-Rex 700E F3C - Under Construction

07-06-2010, 12:45 AM	#200 (permalink)
Justin Stuart Registered Users Join Date: Mar 2008	I'm not sure if HJ's Chinese weights will fit the new grips since they already have weights on them? __________________ Avant RC Scorpion Power Systems ThunderPower RC Kontronik Drives Last edited by Justin Stuart; 07-06-2010 at 06:39 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in