iCharger 206B How to connect to Car battery?

[briguyy]

Hi I have the iCharger 206B and I usally use the AC Junsi P350 power supply with it but I want to have an option for at the field.
I found something on progressiverc:
http://www.progressiverc.com/6-batte...th-clamps.html
I could use that and solder 4mm female bullet connectors on the ends but im afraid the 11AWG wire wont fit in the bullet connector to solder....any ideas?
Thanks

[RedOctobyr]

I'm not sure if 11AWG will fit in a 4mm bullet. Even if it doesn't fit, I'd just cut some of the strands off. You'll have plenty left.

My 106B+ came with battery clamps that accept the charger's 4mm male bullets on the input leads. I will use a lead-acid battery at the field, the charger leads are long enough with the charger on the ground next to the battery.

If you don't need the leads to be longer, you could put clamps like these on your 4mm male bullets on the input leads:
http://www.progressiverc.com/battery-clamps.html