Important info about the new "S" Receiver Units from Walkera

[Steve Joblin]

There seems to be a lot of confusion about the new "S" Receiver Units from Walkera that feature the 3-Axis Auto-Stabilizing System.

This is subject to change, but from what I am reading, I believe the following to be correct:

• RX2433S - For FP helis. Features micro connectors used on the 4#6S
• RX2435S - For FP helis. Features JR connectors used on the UFLYS
• RX2610S - For CP helis. Features micro connectors used on the 4G6S, but can only be bound in 2601 Mode. Note that you will need to plug your servos in differently depending on what version firmware your transmitter has.

[SQRT(-2)]

Originally Posted by Steve Joblin

• RX2610S - For CP helis. Features micro connectors used on the 4G6S, but can only be bound in 2601 Mode. Note that you will need to plug your servos in differently depending on what version firmware your transmitter has.

Firmware version your TX has? What are you talking about Steve, mine seems to work well, the version is 2.2 is that ok?

[Steve Joblin]

The version of the firmware programmed into your 2801 transmitter can be displayed by going to the DISP menu. The version number is shown on the top right of the screen.

The info I provided was based on my most recent understanding as per discussions occuring on other forums... I will provide updates as soon as I get more info.

[DMD73]

My CB180Z came with RX2437S.

If anyone knows all the new RX-S models and detailed differences would be great to learn.

[gilligansc]

I thought you could change all the servo functions through the Tx menu.
Walkera 4g6s :easiest heli to fly...almost as easy as my blade msr, but a lot more agile and fast.Not much flight time.
Gilligansc