Warp head on my Beam

[Stevemech]

While I wait for parts to get my Warp flying again I fitted the Warp head to the top hole of the shaft.To convert from the 6mm Warp head to the Beam 5mm shaft I used a owb sleeve and drill a hole to match the hub.I took it for a flight and vibrations where slightly lower than with the Tarot dfc head.Also like the Warp you need to use 15mm on the servo arms to get full travel.As far as being worth doing, it flys a little rougher than the Tarot head but I think because it has no dampners and the Beam is light.
Steve

[Stevemech]

Got some more flying in and gyro adjustments( lowered the agility)a d really starting to like it.I have less corrections to make in loops and inverted hover , same with flips and rolls.Alot of the Warps flying qualitys come from just the head, I'm going to get another head when there avaiable!Very strong, not likely to break!
Steve

[Mixmaster Pilot]

Thanks, yeah the head is where the real difference to other 450's is once you exclude size. Will keep an eye on head prices.