Register Now

Finless · 02-19-2007, 10:52 PM

OK here is a complete overview about the Trex450 "official" V2 heli. I show all the changes good and bad.
This does not show a build video as I think that would be redundant (it's not that different) but does go into all the changes and I do a good overview and build of the major change which is the head and thrust bearings.

If you all feel I need to cover some build things let me know and I will.

ENJOY!

VIDEO -> Align SE Version 2 overview PART 1 (50 Megs)

VIDEO -> Align SE Version 2 overview PART 2 (50 Megs)

Here is the V2 Manual in PDF High Resolution 20 megs
VIDEO -> Align SE Version 2 PDF Manual High Rez (20 Megs)

Bob

Jungleman · 02-19-2007, 11:12 PM

Nice with the vids Bob. Thx for the update

Finless · 02-19-2007, 11:19 PM

Thanks, I hoped you liked it and I know I sounded a little like I was advertising but honeslty I wasnt! I was just excited about this new heli and couldnt refrane myself

Bob

rcboosted · 02-19-2007, 11:31 PM

Love the new blade grips with thrust bearing. I wonder if the new 4mm feather will hold up better in a crash. Thanks for the update.

brovic777 · 02-19-2007, 11:39 PM

Hey Finless, you getting the new Diablo from RC-Tech also?

RustyFingers · 02-19-2007, 11:45 PM

Awesome bob..... look forward to getting my hands on one...

Who's got 'em?

Finless · 02-19-2007, 11:50 PM

All the MAJOR advertisers here on HF will be getting a few this week!
CALL THEM TOMORROW if you want to be the first kid on the block with one!
Tell them I sent you from HF

(they will HATE me for saying that TRUST ME).

Bob

rdlohr · 02-19-2007, 11:54 PM

WOW! I want one.

They're not putting me out of business, but they sure fixed things I keyed on. They even are using the shorter horiz fin like I made for Torkboy.

Nice vid Bob, thanks

Rick

No_Gassers_Here · 02-20-2007, 12:23 AM

I gotta have one I wonder it GrandRC will have them by Friday(payday)

gagi · 02-20-2007, 01:56 AM

Man BOB that just looks sweet!

Suddenly the light blue anodizing looks less impressive.

But seriously all I want is the new MOTOR and thrust bearings.

Now all they need is a TORQUE Tube conversion for the SE and I will be in heaven!

The belt is getting a little annoying.

I am so impressed that align actually listened to their customers and made all the important changes!

-Gagi

skid · 02-20-2007, 02:06 AM

Wow Bob sounds happier than a sissy in Boys Town........

Sunkan · 02-20-2007, 02:16 AM

Bob, how is the new tail pitch slider?
Is it still 0 pitch when the slider is in the center or have they added a bit of positive pitch in their new design?

brovic777 · 02-20-2007, 02:17 AM

Quote:

Originally Posted by skid

Wow Bob sounds happier than a sissy in Boys Town........

I don't know about happier than a sissy boy, but he sure sounded like one very happy camper. Guess I would of too if I would have got one!!!

If I only would of waited another month to get my Trex.

I'd be doing the Finless Dance!!!!!

:mrgreen: :dance :mrgreen: :dance :mrgreen:

Pinecone · 02-20-2007, 05:41 AM

I just wonder who will be smart enough to package an upgrade kit. New head/spindle/grips setup.

I already have the motor coming.

BruceW · 02-20-2007, 01:36 PM

Bob, are you going to put the PDF of the new V2 manual online as mentioned in the video? Or if its already up, do you have a link?

Jermo · 02-20-2007, 01:44 PM

really doesn't look all that great...I'll need to check it personally...um..just send me one for eval :mrgreen:

hehe... I'm saving up now..maybe I can get one for Christmas...

oh..I can't find the manual DL can somone pm me the link/post? tnx..
Jermo

Finless · 02-20-2007, 02:34 PM

Link to the V2 manual is now posted above in the first post listing the video links.

Bob

glucoseboy · 02-20-2007, 03:05 PM

Hey there Bob,

FYI: The manual posted is the one for the 600CF.

Magnasanz · 02-20-2007, 07:50 PM

Anyone else having issues downloading the file. Keeps moaning about not being able to create directory

Finless · 02-20-2007, 08:11 PM

I fixed the link but it looks like the download server is having a problem. It should be fixed soon.

Bob

02-19-2007, 10:52 PM	#1 (permalink)
Finless Team Taco VP My HF Map location Join Date: Nov 2005	Trex 450 SE V2 Overview VIDEO OK here is a complete overview about the Trex450 "official" V2 heli. I show all the changes good and bad. This does not show a build video as I think that would be redundant (it's not that different) but does go into all the changes and I do a good overview and build of the major change which is the head and thrust bearings. If you all feel I need to cover some build things let me know and I will. ENJOY! VIDEO -> Align SE Version 2 overview PART 1 (50 Megs) VIDEO -> Align SE Version 2 overview PART 2 (50 Megs) Here is the V2 Manual in PDF High Resolution 20 megs VIDEO -> Align SE Version 2 PDF Manual High Rez (20 Megs) Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco! Last edited by HF_Jason; 01-23-2020 at 08:46 AM..

02-19-2007, 11:19 PM	#3 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	Thanks, I hoped you liked it and I know I sounded a little like I was advertising but honeslty I wasnt! I was just excited about this new heli and couldnt refrane myself Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

02-19-2007, 11:50 PM	#7 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	All the MAJOR advertisers here on HF will be getting a few this week! CALL THEM TOMORROW if you want to be the first kid on the block with one! Tell them I sent you from HF (they will HATE me for saying that TRUST ME). Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

02-19-2007, 11:54 PM	#8 (permalink)
rdlohr HF Support My HF Map location Join Date: May 2006	WOW! I want one. They're not putting me out of business, but they sure fixed things I keyed on. They even are using the shorter horiz fin like I made for Torkboy. Nice vid Bob, thanks Rick __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

02-20-2007, 12:23 AM	#9 (permalink)
No_Gassers_Here Registered Users My HF Map location Join Date: Nov 2006	I gotta have one I wonder it GrandRC will have them by Friday(payday) __________________ The ground is only one dumb thumb away!!! Trex 600CF Silver,401/9253,60XL/75amp,all the metal bling bling 250v1 410's(5065mg's when I get a minute),750g,5084mg, hyperion battery( currently my favorite heli) 450SE V2 NUE 1107/2/H/2.3, CC45apm esc,770 3D/3400g,65mg,V_Blades,4s 21ooma Hyperions

02-19-2007, 11:12 PM	#2 (permalink)
Jungleman Join Date: Oct 2006	Nice with the vids Bob. Thx for the update

02-19-2007, 11:31 PM	#4 (permalink)
rcboosted Registered Users Join Date: Sep 2006	Love the new blade grips with thrust bearing. I wonder if the new 4mm feather will hold up better in a crash. Thanks for the update.

02-19-2007, 11:39 PM	#5 (permalink)
brovic777 Join Date: Jan 2007	Hey Finless, you getting the new Diablo from RC-Tech also?

02-19-2007, 11:45 PM	#6 (permalink)
RustyFingers Registered Users Join Date: Nov 2006	Awesome bob..... look forward to getting my hands on one... Who's got 'em?

02-20-2007, 01:56 AM	#10 (permalink)
gagi Join Date: Jul 2006	Man BOB that just looks sweet! Suddenly the light blue anodizing looks less impressive. But seriously all I want is the new MOTOR and thrust bearings. Now all they need is a TORQUE Tube conversion for the SE and I will be in heaven! The belt is getting a little annoying. I am so impressed that align actually listened to their customers and made all the important changes! -Gagi

02-20-2007, 02:06 AM	#11 (permalink)
skid Registered Users Join Date: May 2006	Wow Bob sounds happier than a sissy in Boys Town........

02-20-2007, 02:16 AM	#12 (permalink)
Sunkan Registered Users Join Date: Jul 2006	Bob, how is the new tail pitch slider? Is it still 0 pitch when the slider is in the center or have they added a bit of positive pitch in their new design?

02-20-2007, 05:41 AM	#14 (permalink)
Pinecone Registered Users Join Date: Sep 2006	I just wonder who will be smart enough to package an upgrade kit. New head/spindle/grips setup. I already have the motor coming. __________________ Terry AMA#47402, IRCHA # 3395 Blade CP "Pro", Trex 450SE, PiccoZ, Quick of Japan EP8v2 EX, Hurricane 550, Hurricane 200, JR Vibe 50, Blade mCX, Bergen Intrepid Gasser, Pantera 50, Blade mSR, Novus CP

02-20-2007, 01:36 PM	#15 (permalink)
BruceW Registered Users My HF Map location Join Date: Jun 2006	Bob, are you going to put the PDF of the new V2 manual online as mentioned in the video? Or if its already up, do you have a link? __________________ Logo 500 3D /Scorpion HK4020-1100KV (16T)/Jazz80/BLS451/Spartan DS760/BLS251/RT 560mm/AR9000 TRex 450SE /Scorpion HK-2221-8 (13T)/ AlignESC35(X)/ HS65MG/Spartan DS760/S9650/AR6100 Spektrum DX7

02-20-2007, 01:44 PM	#16 (permalink)
Jermo Registered Users Join Date: Nov 2006	really doesn't look all that great...I'll need to check it personally...um..just send me one for eval :mrgreen: hehe... I'm saving up now..maybe I can get one for Christmas... oh..I can't find the manual DL can somone pm me the link/post? tnx.. Jermo __________________ Jerry Moore, AMA #878954,TARANIS OpenTX- Pantera 600 FB - Pantera .60 FB - Takes a licking and keeps on kicking! KISSAM = Keep It Simple Stupid: Affordable, Maintainable - Visit Early and often - http://open-txu.org

02-20-2007, 02:34 PM	#17 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	Link to the V2 manual is now posted above in the first post listing the video links. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

02-20-2007, 03:05 PM	#18 (permalink)
glucoseboy Registered Users Join Date: May 2006	Hey there Bob, FYI: The manual posted is the one for the 600CF. __________________ - TRex 450SE /AstroFlight 020 / Quark 33 / 11T / HS65HB / GY401 + FUT9650 / Spektrum DX7/6100

02-20-2007, 07:50 PM	#19 (permalink)
Magnasanz Join Date: Feb 2007	Anyone else having issues downloading the file. Keeps moaning about not being able to create directory

02-20-2007, 08:11 PM	#20 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	I fixed the link but it looks like the download server is having a problem. It should be fixed soon. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in