Head speed for Mikado 800

[arefim]

Today I tried my maiden flight for logo 800. My electronics are kontrionik 200 ESC,
Fly barbless Demon 3sx,two 5000 7 s lipo batteries and my transmitter is spectrum 9DX
And the motor is kontrionik 800
I set the throttle curves straight at 65 , 70 and 75 for normal , stunt 1 and 2 respectively.
I'm using 17 teeth pinion.
When I measured the head speed with the I phone calculator it was 3000 RPM at normal mode. I expected to be around 1700 according to Mr. Mel calculator.
Do you think I did some thing wrong in setting the governor
What I should do?
Can any one with similar electronics give me an idea about the throttle curve values they have?
Thanks

[satsuma]

My set up is very similar, there is NO WAY you are hitting 3000 rpm, suggest you check your phone settings, at 70% I am at 1700 rpm.
The head would explode at 3000 rpm I should think, my headspeed checked with MA tacho

[Gala-Tante]

Definitely no way you were at 3000

Greetings

Chris

[5#10]

3000 RPM impossible !

I think that the setting of your phone is are not correct.
Maybe you should divide the number by 2, 1500 RPM comes closer to the reality.