Synergy E6/7 Setups Thread

[quantummodz]

My E7 Setup:

Synergy E7 - kevlar belt drive
Align 750mx 450kv
castle creations edge 120 esc
beastx v3
optipower 2S 2200mah lipo RX system power
optipower Backup Guard
esc Gov: 1760/1960/2060
Hitec HS-8330SH HV Cyclic Servos
Hitec HSG-8315BH HV Rudder servo
SAB 620 Mains
align 105 Tails
optipower 30c 4300 12S stick pack
Hi-Energy Extreme 30C 12S 4500mAh stick pack

[crf69]

scorpion forty five twenty five
yge two hundred high voltage electronic speed controller
mks x eightzzz
sbus sixty two zero two. fourteen sg.
vbar with newer sensor same as silver but in blue case.
optipower five thousand mah fifty see twelve cell.
optipower twenty one fifty two cell mah receiver lipolymer.
optipower super combo intelligent backup solution with light emitting diode.
cyclone blades six hundred ninety five millimeter mains
cyclone blades one hundred and fuve millimeter tails





Sent from my SM-G900V using Tapatalk

[Funky]

Originally Posted by Superior

My current E7 Setup:

Synergy E7 /w Belt
Scorpion Hk4035 -560 14t Pinion
Castle Edge 160HV ESC
Castle Gov 1900/2000/2200 Set Rpms
Ikon Fbl Unit
Rjx Fs-0521hv Cyclic Servos
Rjx Fs-0521thv Rudder servo
Rjx 690Fbl Mains
Kbdd Extreme Edition 104 Tails
Skyy Lipo 30C 4400mAh 10S Split Stick Pack
Thor 45C 4400mAh 10S Split Stick Pack

Old post but do you know your ready-to-fly weight with this setup? What is your flight time and what style of flight (beginner, sport, 3d, hard 3d)?

[Mike_Capflyer]

Hi All,
This seems like a good place to pose to all of you the following question. I've been flying Trex 500 helis for a while and have lots of 6S 3000 batteries and chargers that work well at this size. I would like to buy a synergy heli that can fly two of these batteries in a 12S setup. I would like to hear recommendations as to setups all of you think would be good for someone who likes mild 3D.

Also, I'm confused over how to build an "E6". Seems that you can buy an E5 and stretch it to fly 600mm blades. But it also seems that some people buy the E7 and then just fly smaller blades and call it an E6. Can someone provide clarity?

Thanks
Michael

[Rodney Kirstine]

I think with those batteries, your best choice would be an E5 stretched to 600. There is a kit available with everything you need to stretch it.

Synergy E5s 600mm Stretch Kit [999-102] - $38.00 : Synergy Distribution, Serving the Synergy Enthusiast

The E5 is fantastic as a 600. Later, if you want to run it with larger batteries, you can stretch it to run 626 blades or even 700. I have mine stretched and run 716 mains and use 4400mah packs. It's a very versatile air frame.