Trex 800E DFC Motor choice.

[sashin]

Hi everyone. I have just been able to get a used 800E DFC Trekker from a fellow freaker as airframe only.
I have Align HV servo's, full size VBAR and the Quantum 4530.500 motor lying here and i was going to install these in the kit. I have purchased the 780mm blades and 112T slant main gear and 12T slant motor pinion as i would like to run it as DFC Pro headspeeds.
My question is can i use this Quantum motor in the 800E? I had used this motor in my Goblin 700 when i had that heli. Trying to look around the web to for someone using this motor with the 800E DFC...can't find anything. I would prefer not to purchase another motor if i can avoid it.
Also will this motor run with CC 160HV ESC?

These are the rest to the Motor specification:

Stator Diameter 45MM
Stator Thickness 30MM
No. of Magnetic Poles 10
No. of Stator Arms 12
Motor Kv 500 RPM/Volt
Max Continuous Current 125 Amps
Max Continuous Power 5000 Watts
No-Load Current (lo) 2.0 Amps@10V
Motor Resistance (Rm) 0.010 Ohms

Anyone with any insight....greatly appreciated.
Thanks in advance.

[jsbach#1]

112/12 gearing and 780 blades you're talking 800 pro dfc specifications. And that motors specifications are almost identical to Aligns 850mx motor which comes in that kit. Using the castle esc it was a really good match for me. Your quantum the only difference I see its 500kv instead of 490. I wouldn't even consider that a factor as I doubt the specs are thaaaat exact anyways. Put it on any try it no ? 160hv is a good esc nothing to worry about there.

[sashin]

@ jsbach#1

Thanks for the reply. I was not sure if anyone who owns the Trex 800E DFC Pro would chime in with their thoughts. Great.....I will give it a go.
Now I will look around for the CC 160HV ESC..