START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Kontronik Drives Jazz and Jive ESC's and other Kontronik equipment support |
|
LinkBack | Thread Tools | Display Modes |
12-28-2011, 09:55 AM | #1 (permalink) |
Registered Users
Join Date: May 2010
|
100 LV vs. 120 HV for Logo 500SE 6S setup
I am looking at a Kontronik for my Logo 500SE. Using a Scorpion 4025-1100 motor. So a 6S setup. What is the difference from a LV compared to a HV. I was thinking 120 HV to future proof possible upgrades. Might go bigger and 12S setup. Not sure but I would prefer to be ready. Would the 120 HV work fine with the Logo 500SE setup. Is it a lot heavier?
Thanks
__________________
Logo 550SX, Modified Logo 400SE, Forza 450 3S |
Sponsored Links | |||
Advertisement |
|
12-28-2011, 11:27 PM | #2 (permalink) |
Registered Users
|
They all weigh about the same... even comparing LV to HV... they are pretty much all the exact same size.
I use the 80LV with my 6s Outrage 550 with no issues... and 80HV on my 12s Outrage 50 (running 623mm blades) with no issues. I installed the optional heatsink on both.
__________________
"It's not just a hobby... it's a lifestyle" - Pete ϟ MINNESOTA! Goblin 500 + 700 / SK540 / Jives / DX8 / Quantum / RJX servos / 306b / Deep cycles |
12-29-2011, 12:08 AM | #3 (permalink) | |
Registered Users
|
Quote:
My History: Bought Jive 80HV for 700E, replaced with 120HV Bought 80LV for a 500E, replaced with 100LV Would have been better to buy once. For that matter just get a HeliJive in case you ever want VBar Gov.
__________________
"If you think you can or you can not you are right" Goblin Xera 4530, YGE 160,VBar Diablo, HJive, 4525 Ultimate,VBar Synergy N5C sitting in Box... |
|
Thread Tools | |
Display Modes | |
|
|