Titan X50's finish photos...let's see em!

[Scooterpilot]

Rob,

Looks great and very clean installation.

[Thorvald]

Originally Posted by Rob43

Thanks!

Damn Rob that's a great idea for the carpet on the table! (I have the same folding table and towels just blow away lol).

What did you use, just a floor mat and cut/glued it down?

Cheers
Tim

[Sky_]

Titan X50N

[Rob43]

Originally Posted by Thorvald

Damn Rob that's a great idea for the carpet on the table! (I have the same folding table and towels just blow away lol).

What did you use, just a floor mat and cut/glued it down?

Cheers
Tim

Sorry I didn't see this previously, Tim.

Actually it was some left over boat trailer bunk carpet. I bought it at Boaters World a few years ago, and never opened the package. I used the 3M spray adhesive to bond it. I am recalling that Contact Cement didn't work as it didn't adhere to the resin of which the table is made. But the 3M spray seemed to do fine.

[Taxus812]

I just completed my conversion to FBL and overhaul

I added new KBDD main blades and a new canopy from canomod (after reading that they will custom paint any scheme on any canopy for no additional charge. <cough> Rob43<cough>). I picked their "Dragon" color scheme

I rebuilt the motor (ring, bearings), upgraded the head , Replaced all the fuel lines and clunk lines, Tore the entire heli down to parts and inspected\refurbished all the bearings and parts.

Still wavering on the 3GX but its installed and setup.

Just need a few weeks to get cleared to fly medically and some better weather to test
the controller

[Rob43]

Wow, Taxus812...those pics look awesome with the sun and snow! Most colorful X50 I've ever seen! I saw the canopy in the background of your other post. Love it with the blades!

[Rob43]

Originally Posted by Thorvald

Damn Rob that's a great idea for the carpet on the table! (I have the same folding table and towels just blow away lol).

What did you use, just a floor mat and cut/glued it down?

Cheers
Tim

On another note, I wound up making a table cover from some of the cheap grade tool drawer lining as a fuel barrier. A table cloth, if you will. I added Velcro fasteners to the bottom of the vinly, using contact cement (self-adhesive from Velcro wouldn't hold), and it held nicely to the carpet.

[Commodore8888]

I'll see if I can get some pictures this weekend of mine and a buddy's. I still have the lame milk jug cano while Montee is running around with a fancy Fusuno

[zes0086]

Here are a few pics of my X50B that I made some changes to this winter so far. I swapped out the Redline with a new OS55 HZ-R (which I can't wait to spool up) cause I could never get the carb figured out on the Redline. I also made a new tray for my VBar and Switchglo which I also just added. Installed all new Savox digital servos with the red aluminum servo arms. I really love this heli and the way it flies specially with the Vbar controlling everything.

[Rob43]

Can I ask, how do you vent the the tank when filling?

[zes0086]

Originally Posted by Rob43

Can I ask, how do you vent the the tank when filling?

I'll have to pull the top fuel line off the tank or put another tee in the line just for venting. Good call out !

[Rob43]

Originally Posted by zes0086

I'll have to pull the top fuel line off the tank or put another tee in the line just for venting. Good call out !

OK. I run a tee for that purpose and a KSJ line stopper clamp/line plug.

[AlarmedBread]

Originally Posted by Commodore8888

I'll see if I can get some pictures this weekend of mine and a buddy's. I still have the lame milk jug cano while Montee is running around with a fancy Fusuno

Loving this heli! That canopy is sick!

[Skidoojoe]

Just got back into flying I found a brand new x50f nitro with torque tube and bought a used one for spares , I put bls451cyclic, s9256 tail and s 9252 throttle, 5000 2 cell lipo and castle bec, and ikon fbl system, I use to fly raptor 50 se, almost done building , how stable is this heli compared to my old 50 se, I loved my old se, I am not the greatest flyer only can do figure 8 but it's fun

[plopes]

Just completed my latest X50 with some upgrades.

[plopes]

Couple more pics.

[majorlemond]

Loving the aluminium tail upgrade. What parts did you use for that?