START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Belt CP E-Sky Belt CP |
|
LinkBack | Thread Tools | Display Modes |
07-18-2009, 10:06 PM | #1 (permalink) |
Registered Users
Join Date: Jan 2008
|
Tower Pro Servo Wire Colors
Hi all, just received my new Tower Pro servos (Brown,Orange,Yellow) and was wondering when plugging them into my RX is the Brown wire at the plug the same as the black wire on the Esky servos (Black,Red,White)
|
Sponsored Links | |||
Advertisement |
|
07-18-2009, 10:21 PM | #2 (permalink) |
Registered Users
|
Yes, and the wire order is the same.
Brown = Black = Ground Orange = Red = Positive Yellow = White = Signal
__________________
T-Rex 600NP, T-Rex 500 ESP, HDX500 SE V2, HDX450 SE V3, T-Rex/Outrage SE V2, EXI450, T-Rex 250, CopterX/Guru-Z hybrid, HBFP separates, Lama V4, 2 x Walkera 4#3B |
07-18-2009, 10:26 PM | #3 (permalink) |
Registered Users
Join Date: Mar 2009
|
Tower Pro SG90 = Yellow, orange, brown
Esky servo = white, red, black I use SG90s for cyclic, and an Esky servo for the tail rotor. In my RX, with the plugs plugged in, these are the colors left to right. Hope this helps some.
__________________
Kane EXI Frame, Trex 450SE V2 head, 450HDX/3200kV, Dynam ESC, Trex flybar, Trex paddles, Trex/EXI canopies, Align 325 Pros, SG90 cyclic, Esky tail servo, Flightmax and Rhino LiPos, Tech 450 metal V/H fins, 13T Rhino pinion, CNC tail, Trex 450 tail rotors, EK2-0704B HH gyro, DX6i and AR6200. |
07-18-2009, 11:11 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2008
|
Thanks
I am using the Specktrum-AR6100-EndPins , do I need to reverse anything in my Specktrum Dx6i |
07-19-2009, 06:30 AM | #5 (permalink) |
Registered Users
|
No, SG90s work in the same direction as your original Esky servos.
Of course you always have to check with the motor disconnected before attempting to fly. There's always the chance you might have plugged something in the wrong connector. Oh, and obviously you'll be setting your subtrims again for the new servos, so remember to reset them to zero before you put the servo arms on. Might find a better spline that way.
__________________
T-Rex 600NP, T-Rex 500 ESP, HDX500 SE V2, HDX450 SE V3, T-Rex/Outrage SE V2, EXI450, T-Rex 250, CopterX/Guru-Z hybrid, HBFP separates, Lama V4, 2 x Walkera 4#3B |
Thread Tools | |
Display Modes | |
|
|