Register Now

Swedishe · 03-14-2014, 08:38 PM

Guys,

I was fed up with the Warp COG problems and my inability to properly strap down the pack when it was so far forward. So.... I created a small carbon fiber battery tray extender. COG is now perfect with a battery properly strapped down! It extends the battery tray about 1.5cm and gives me another solid anchor for a strap.

Tachead · 03-14-2014, 09:39 PM

Nice mod but, you just have to buy the right packs man and you won't need it. The Warp needs heavier packs. In the 250-290 gram range. More and more packs come out for it all the time. I get perfect COG and I didn't even re-drill the canopy. I also still have the Chinese weights in the tail grips and am not even running CF tail blades.

Sent from my SGH-I337M using Tapatalk

Swedishe · 03-14-2014, 11:12 PM

Maybe I'll try a could heavier ones later, but for now this will let my two right now work

Tachead · 03-14-2014, 11:24 PM

Quote:

Originally Posted by Swedishe

Maybe I'll try a could heavier ones later, but for now this will let my two right now work

For sure man, got to use them up right

Hawk404 · 03-15-2014, 12:12 AM

I had a number of Warp issues but, honestly, that wasn't one of them although I do think the extension is a nice idea and the picture is appreciated.

I had Thor 1350s which had a bad case of "Dunlop's Disease" - as in the battery done lopped over the tray. I did re-drill the canopy, install the extended gizmo etc but the battery was handily dealt with by cinching it up on the available tray in a manner reminiscent of an obese person slipping into a girdle - it may have been a bit blue in the face when I was done but it wasn't going anywhere.

03-14-2014, 08:38 PM	#1 (permalink)
Swedishe Registered Users Join Date: May 2012	Extended battery tray Guys, I was fed up with the Warp COG problems and my inability to properly strap down the pack when it was so far forward. So.... I created a small carbon fiber battery tray extender. COG is now perfect with a battery properly strapped down! It extends the battery tray about 1.5cm and gives me another solid anchor for a strap. Attached Thumbnails __________________ Parkzone Visionaire / T-28 Trojan / Icon A5 / UMX sbache mCPX V2 / mCPX BL / Nano QX / UMX Extra 550e FBL (BeastX) / Compass 7HV (AR7200) / Warp 360 "Don't sweat the petty things and don't pet the sweaty things"

03-14-2014, 09:39 PM	#2 (permalink)
Tachead Registered Users Join Date: Jul 2012	Re: Extended battery tray Nice mod but, you just have to buy the right packs man and you won't need it. The Warp needs heavier packs. In the 250-290 gram range. More and more packs come out for it all the time. I get perfect COG and I didn't even re-drill the canopy. I also still have the Chinese weights in the tail grips and am not even running CF tail blades. Sent from my SGH-I337M using Tapatalk

03-14-2014, 11:12 PM	#3 (permalink)
Swedishe Registered Users Thread Starter Join Date: May 2012	Maybe I'll try a could heavier ones later, but for now this will let my two right now work __________________ Parkzone Visionaire / T-28 Trojan / Icon A5 / UMX sbache mCPX V2 / mCPX BL / Nano QX / UMX Extra 550e FBL (BeastX) / Compass 7HV (AR7200) / Warp 360 "Don't sweat the petty things and don't pet the sweaty things"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-15-2014, 12:12 AM	#5 (permalink)
Hawk404 CHC Benefactor Join Date: Jul 2011	I had a number of Warp issues but, honestly, that wasn't one of them although I do think the extension is a nice idea and the picture is appreciated. I had Thor 1350s which had a bad case of "Dunlop's Disease" - as in the battery done lopped over the tray. I did re-drill the canopy, install the extended gizmo etc but the battery was handily dealt with by cinching it up on the available tray in a manner reminiscent of an obese person slipping into a girdle - it may have been a bit blue in the face when I was done but it wasn't going anywhere.

Register Now

Log-in