START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Align 3G FBL System Align 3G FBL Flybarless System Software and Hardware Support |
|
LinkBack | Thread Tools | Display Modes |
07-08-2013, 11:33 AM | #1 (permalink) |
Registered Users
Join Date: Jun 2013
|
3GX Bind to Spektrum dx7s
Hey everyone,
I'm new to the 450's (new to Align period) and I purchased a barely used Trex 450 pro FBL with 3gx. I cannot bind for the life of me. It's set up like the original owner had it (stock for the most part and he had a dx8). However, I have no idea, nor des Align show anyting in the manual on how to bind with the 3GX already mounted on heli. My understanding is, I cannot upgrade this 3GX to 3.1 until the bind has been completed. Does anyone have a good pic of how the set up should be to bind it? Or any ideas please? Thanks! |
Sponsored Links | |||
Advertisement |
|
07-08-2013, 12:59 PM | #2 (permalink) |
Registered Users
Join Date: Apr 2012
|
Hi DB,
I assume you are running a Sat, because the 3gx itself is not a receiver and won't bind without either a Sat or an external Rx, but you don't specifically say? If you do have a sat or Rx, it should just be a matter of inserting the bind plug to your 3gx, power up (sat should flash) then turn on your Tx with the bind button depressed. Once bound your 3gx should then 'light' up a few seconds after. You can then pull the bind plug and do a normal power off sequence. Power up again depressing the little black set button on the 3gx until you see 2 or 3 lights illuminate one after another, but before all light up, then release to enter DIR mode. As a precursor to above, open the 3gx wizard on your computer as it has an easy walk through on all of the above. Ron Lunds YouTube channel is excellent if you need some help too. Hope this helps a little. |
Thread Tools | |
Display Modes | |
|
|