Register Now

HeliBenj · 11-03-2011, 05:30 AM

Hi guys,

Tried using gov on my TDR with HW120HV and align motor 700MX 530 kv.
The tail is wagging were before with fixed end points it was solid.

Do you know how to remedy that?

This is using mid timing (5), 12 kHz PWM. Tried 1600 RPM and 1900 RPM with same results. Governor high of course
TT GT5 flybarless system

Any insight appreciated!

ARM_Coder · 11-03-2011, 05:43 AM

Hi!

Some ESC brands are problematic with governor mode, and cause tail wag. I had such an experience with an Align ESC, and IIRC, Castle ESCs have this problem too.

My Trex500E had this problem, and I replaced the ESC for a Hobbywing 80A, now the governor works like a charm.

The cheapest way is to turn the governor off, I was about to do that, but as my Align ESC bursted into flames during a bench test, I had to order another ESC anyway...

Cheers!

Sent from my GT-I9000B using Tapatalk

K2Freak · 11-04-2011, 04:31 PM

Does it do that on all the settings? What about if you turn the gov gain down?

From what I have observed, ANY gov is going to wag if it's set too high.

HeliBenj · 11-04-2011, 05:25 PM

AFAIK gain is not adjustable on HW ESC... did I miss something?

K2Freak · 11-04-2011, 06:20 PM

Looks like you're right - you get to choose low or high.

Wonder how is that supposed to work?? All the others that I've used needed adjustment to get set correctly. 8^)

11-03-2011, 05:30 AM	#1 (permalink)
HeliBenj Registered Users Join Date: Jan 2009	Governor mode any success? Hi guys, Tried using gov on my TDR with HW120HV and align motor 700MX 530 kv. The tail is wagging were before with fixed end points it was solid. Do you know how to remedy that? This is using mid timing (5), 12 kHz PWM. Tried 1600 RPM and 1900 RPM with same results. Governor high of course TT GT5 flybarless system Any insight appreciated! __________________ Ben Goblin 500 IKON w/ gov, Quantum 4115-1200, Hitec 5245, BLS251 DX8, RF6

11-03-2011, 05:43 AM	#2 (permalink)
ARM_Coder Registered Users Join Date: Jan 2011 Location: Sao Paulo, Brazil	Hi! Some ESC brands are problematic with governor mode, and cause tail wag. I had such an experience with an Align ESC, and IIRC, Castle ESCs have this problem too. My Trex500E had this problem, and I replaced the ESC for a Hobbywing 80A, now the governor works like a charm. The cheapest way is to turn the governor off, I was about to do that, but as my Align ESC bursted into flames during a bench test, I had to order another ESC anyway... Cheers! Sent from my GT-I9000B using Tapatalk __________________ Compass 7HV / Atom 6HVU / Atom 5.5 / Align Trex 500L / Spektrum DX8 Not flying anything - model or full - since 2017!

11-04-2011, 04:31 PM	#3 (permalink)
K2Freak Registered Users My HF Map location Join Date: Mar 2009 Location: Samish Island, WA	Does it do that on all the settings? What about if you turn the gov gain down? From what I have observed, ANY gov is going to wag if it's set too high. __________________ AMA 373608

11-04-2011, 05:25 PM	#4 (permalink)
HeliBenj Registered Users Thread Starter Join Date: Jan 2009	AFAIK gain is not adjustable on HW ESC... did I miss something? __________________ Ben Goblin 500 IKON w/ gov, Quantum 4115-1200, Hitec 5245, BLS251 DX8, RF6

11-04-2011, 06:20 PM	#5 (permalink)
K2Freak Registered Users My HF Map location Join Date: Mar 2009 Location: Samish Island, WA	Looks like you're right - you get to choose low or high. Wonder how is that supposed to work?? All the others that I've used needed adjustment to get set correctly. 8^) __________________ AMA 373608

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in