Register Now

Dave Snider · 01-05-2011, 12:02 PM

I've managed to setup a few tx's including a dx7 on reflex but my 10c has got me scatching my a$$ here.No matter what I do reflex will not detect it.I'm starting to think I may need a new interface cable.
Anyone have any suggestions? By the way I have a blue dongle,should I have it looked at?

darryl123 · 01-21-2011, 01:51 PM

are you in ppm mode

-/thr/- · 01-25-2011, 05:48 AM

If you have the older T10CP, look at the second page of the basic menu. in the PARAMETERS menu set modulation to PPM. It should work then.

This option does not exist on the newer T10CG (2,4GHz). It should work out of the box. At least mine does.

There has been a batch of defective USB cables, but that was years ago. Any chance to test the function of the dongle with another transmitter?

Thorsten

darryl123 · 02-11-2011, 08:39 PM

take out the module and try it

Dave Snider · 03-08-2011, 11:38 AM

Thanks fellas. I tried everything suggested. I have not tried a new cable yet. The 10c powers on when plugged in. And I still have a blue dongle if that matters. Maybe I need a ppm module? In the tainer menu the only available option is OFF and INH. I've gone through the switches and can never get an ON in the menu. I wish I could get this thing going, I would like to get used to it before summer.

01-05-2011, 12:02 PM	#1 (permalink)
Dave Snider Registered Users Join Date: Mar 2008	10c setup I've managed to setup a few tx's including a dx7 on reflex but my 10c has got me scatching my a$$ here.No matter what I do reflex will not detect it.I'm starting to think I may need a new interface cable. Anyone have any suggestions? By the way I have a blue dongle,should I have it looked at?

01-21-2011, 01:51 PM	#2 (permalink)
darryl123 Registered Users My HF Map location Join Date: Oct 2006	are you in ppm mode __________________ raptor 90 fbl raptor 50 raptor x50 fbl raptor e620 fbl

01-25-2011, 05:48 AM	#3 (permalink)
-/thr/- Registered Users My HF Map location Join Date: May 2009	If you have the older T10CP, look at the second page of the basic menu. in the PARAMETERS menu set modulation to PPM. It should work then. This option does not exist on the newer T10CG (2,4GHz). It should work out of the box. At least mine does. There has been a batch of defective USB cables, but that was years ago. Any chance to test the function of the dongle with another transmitter? Thorsten __________________ FBL T-Rex 690 'SuperSix' ESP, Microbeast, 12s, Pyro 700-45, 11T Mod. 1/ 1700 HS, Jive 120+HV, Edge 713FBL, Edge 115mm, DS 610s, Logictec LTS6100G, Robbe/Futaba T10CG 2,4GHz Chuck Norris once shot down a plane by pointing at it and saying "BANG!".

02-11-2011, 08:39 PM	#4 (permalink)
darryl123 Registered Users My HF Map location Join Date: Oct 2006	take out the module and try it __________________ raptor 90 fbl raptor 50 raptor x50 fbl raptor e620 fbl

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-08-2011, 11:38 AM	#5 (permalink)
Dave Snider Registered Users Thread Starter Join Date: Mar 2008	Thanks fellas. I tried everything suggested. I have not tried a new cable yet. The 10c powers on when plugged in. And I still have a blue dongle if that matters. Maybe I need a ppm module? In the tainer menu the only available option is OFF and INH. I've gone through the switches and can never get an ON in the menu. I wish I could get this thing going, I would like to get used to it before summer.

Register Now

Log-in