Blade 300X - video thread

[DoubleCH]

Flown by my buddy (much better pilot):

Here's the setup (for more details visit my thread here):
Turnigy AE 45A ESC with 4A 5.1/6.1V SBEC with BLHeli 10.0.0.0 governed to 3100rpm
Turnigy external 3A 5.1/6.1V SBEC
Parkfly P2632 3800kV Outrunner running E-Flite 11T for B400
Stock battery
450X One-Way-Bearnig mod
Stock 245mm CF blades
+/-12 degrees collective pitch range
12 degrees cyclic pitch limit
BeastX Dial1 and 3 at 1.5 marks above center, Dial at 2.5 marks above center
Gyro gain 58% (range of -100 to 100)
D/R 100/0 on aileron/elevator, 100/20 on rudder
[ame]http://www.youtube.com/watch?v=JDVRwsqQwqs[/ame]

[grovey]

First flight at the field.

Feels a bit weak, so I am going to have to put the CF blades on and up the head-speed, and possibly the collective. So far I like it!

[ame]http://youtu.be/93Jf1UjZpnM[/ame]

[DoubleCH]

As posted in my flight log thread, I was goofing around over picnic tables at the park when it was raining outside. Governed HS down to 2344rpm really help taming down the bird it's like flying co-axial.

My Blade 300X Flight #67 Goofing Around in Close Space [Stabilized] (2 min 0 sec)

[stevebaker]

On-board the 300X with the 808#16 lens D (wide angled)

[cerval06]

hi,

this was my first piro flip practice, this heli is very good, like sim when confidence :

Blade 300x piro flips practice (4 min 14 sec)

[DoubleCH]

Turnigy AE45A ESC with BLHeli governed at 3140 and 3381 rpm HS
HobbyKing Parkfly P2632 3800kV (1st try switching from 11T to 12T)
Tarot thrust tail assembly with cut-down Tarot tail blades
Nanotech 45C 1300

My Blade 300X Flight #142 with 12T for Parkfly Motor (4 min 39 sec)

[Ah Clem]

Nice flying, Double CH!

[bmc76]

Sorry about the crappy droid4 camera going out of focus... I hadn't been to the field in a while and wasn't feeling confident, in fact my knees were buckling a little, that normally only happens with my 450x, ever have those days? Anyway the 300 is flying great other than having to bump up the tail gain after this flight, tail started to kick when I tried to go into taildown funnels. Check out that crisp cyclic response.

[ame]http://youtu.be/gbtNBYUKKmk[/ame]

[ducatimoto]

[ame]http://youtu.be/Zw382DeXfeU[/ame]


Envoyé de mon iPad à l'aide de Tapatalk HD

[DoubleCH]

This thread needs some more activities...

Turnigy AE 45A ESC with 4A/6V SBEC with BLHeli 10.2.0.1 governed to 3422rpm
HobbyKing Parkfly P2632 3800kV Outrunner with Xtreme Production 12T Pinion
450X One-Way-Bearnig mod
Stock 245mm CF blades
KST 215MG HV tail servo running 6V
Tarot thrust tail assembly with stock 300X ball bolts and main shaft nylon nuts
Cut-down Tarot tail blades to stock rotor disc diameter
+/-12 degrees collective pitch range
12 degrees cyclic pitch limit
Gyro gain 40% (range of -100 to 100)

My Blade 300X Flight #175 Trying No External BEC for 3422rpm HS (4 min 31 sec)

[Linzay]

Headcam view. I've only been flying a short time but love this machine.

300X @ RFRCHC (2 min 17 sec)

Sent from my iPhone using Tapatalk 2

[Sky_]

Smooth testflight with new VBar.

[jchandler]

Originally Posted by t-rexn8

Some 3D and a couple almost crashes haha!

http://www.youtube.com/watch?v=Fp-s3S5Y9VA

Nice.

Sent from my Galaxy Note 2 using TapTalk 2

[crockettjb]

I bought this from a guy on here. This is the first full flight. This is going to be a fun one.

http://www.youtube.com/watch?nomobile=1&v=R1DzB_f8TiI
Sent from mu phone usin mu dumb thumbs.

[AThom]

I went out yesterday to test out a new camera I bought..(Midland HD)...I was dealing with 15 MPH winds also my skills have a lot of improvement..I will try to get another video up today but here is yesterdays...

TURN DOWN THE VOLUME

[sn00p]

Originally Posted by jchandler

Nice.

Sent from my Galaxy Note 2 using TapTalk 2

1 of the best I've seen

[Lu523]

Nice vid there xBANGx.

Sent from my iPad using Tapatalk HD

[3vw]

Just a little inverted flying in my small backyard area (28' x 40').

[ame]http://youtu.be/5Eda9QepxlM[/ame]

[jchandler]

Originally Posted by 3vw

Just a little inverted flying in my small backyard area (28' x 40').

http://youtu.be/5Eda9QepxlM

Nice control. Great job. Keep it up. I like your yard too.

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

[3vw]

Originally Posted by jchandler

Nice control. Great job. Keep it up. I like your yard too.

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Thanks JC!

BTW I've watched your vids and you're doing great, especially on the 450x. You keep it up you'll be doin full piro flips & chaos in no time.

I'm using a stock 450x ESC switched to 6 volts powering a set of MKS 95 servos all the way around on this 300x with a Don's wicked motor and Lynx slant gear.