Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Walkera Helicopters > Master CP


Master CP Walkera Master CP Helicopter Support


Reply
 
LinkBack Thread Tools Display Modes
Old 01-11-2015, 02:21 PM   #1 (permalink)
Registered Users
 

Join Date: Jan 2015
Default throttle and pitch curves need help

I am a noon and I just got a master Co last year and want to make sure my settings are correct because I've been reading that the setting preset in TX are possibly to much. The problem I'm having is what the pitch and throttle curves should be set at? If I follow the manual it looks like the pitch curves are set in % rather than degrees and it is confusing me. For example does 100% equal a certain amount of pitch curve and if so...how much? Please help soon because I am getting good frustrated with this. Cannot find an answer anywhere. Thanks in advance to anyone that can help.
hustlerkc is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 01-11-2015, 06:54 PM   #2 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jan 2015
Default throttle and pitch curves need help

I am a noob and I just got a master Co last year and want to make sure my settings are correct because I've been reading that the setting preset in TX are possibly to much. The problem I'm having is what the pitch and throttle curves should be set at? If I follow the manual it looks like the pitch curves are set in % rather than degrees and it is confusing me. For example does 100% equal a certain amount of pitch curve and if so...how much? Please help soon because I am getting good frustrated with this. Cannot find an answer anywhere. Thanks in advance to anyone that can help.
hustlerkc is offline        Reply With Quote Quick reply to this message
Old 01-12-2015, 08:20 AM   #3 (permalink)
Registered Users
 
Posts: 1,483
 

Join Date: Nov 2013
Default

Quote:
Originally Posted by hustlerkc View Post
I am a noon and I just got a master Co last year and want to make sure my settings are correct because I've been reading that the setting preset in TX are possibly to much. The problem I'm having is what the pitch and throttle curves should be set at? If I follow the manual it looks like the pitch curves are set in % rather than degrees and it is confusing me. For example does 100% equal a certain amount of pitch curve and if so...how much? Please help soon because I am getting good frustrated with this. Cannot find an answer anywhere. Thanks in advance to anyone that can help.
Just make sure you have zero pitch around center stick and that the travel is similar in both directions (fold blades or use pitch gauge).

I recommend you to use a linear pitch curve in all modes -100 to 100, dont mess about with less negative pitch in a normal mode, easier to power up with throttle hold and learn not to land with full negative...

As for throttle curves, just pick three flat curves 50% (takeoff) 70% (low head speed) and 100% (max). Chanses are that you sooner or later will start in idle up 2 if thats the one you use when you fly... (not that 100% will be to wild)
__________________
Oxy 285 (6s) (AR7200BX, HKII 2216-16, Koby40) T-REX 450L (6s) (VX1e, HK 2520-1880, HW50v3), Goblin 570 (12s) (VX1n, HKIII 4025-550, Jive80+HV)
Lynx Team Pilot / Oxy Field Rep
Livan75 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1