"Servo Type" for the ZYX?

[SQRT(-2)]

One of the settings is the servo type. I am going to be using some Savox SH-0257MG servos, which number is what Tarot calls the servo type? None of the numbers match the options in the manual.

Thanks

http://www.savoxusa.com/Savox_SH0257...avsh0257mg.htm


Dimensions(mm): 22.8X12.0X25.4
Weight(g): 14.0
Speed(@4.8V sec/60): .13
Torque(@4.8V oz-in): 25.0
Speed(@6.0V sec/60): .09
Torque(@6.0V oz-in): 30.6
Gear: Metal
Bearing: 1BB
Case: Aluminum
Running current (at no load): 150 mA @ 4.8V
Running current (at no load): 180 mA @ 6.0V
Stall current (at locked): 1000 mA @ 4.8V
Stall current (at locked): 1200 mA @ 6.0V
Idle current (at stopped): 5 mA @ 4.8V
Idle current (at stopped): 5 mA @ 6.0V
Limit angle: 220°±10°
Connector wire gauge: ＃26 AWG
Connector wire length: 250 ±5 mm
Horn gear spline: 21T
Control system: Pulse width modification
Amplifier type: Digital Controller
Operating Travel: 90° (when1000→2000 μsec)
Neutral position: 1500 μsec
Dead band width: 5 μsec
Rotating direction: Clockwise (when1500→2000 μsec)
Pulse width range: 700→2300 μsec
Maximum travel: Approx 150°(when700→2300 μsec)

[Daddy]

1520 digital...assuming you have a good digital tail servo too.

I suggest using John Z's software, more info, less chinglish and good support.

http://fbl.net.nz/

Cheers,
Ken