Register Now

mkovalcson · 01-24-2014, 12:21 PM

Quote:

Originally Posted by Seasick78

Flamewheel F550.

The Naza M has gimbal control built in to an extent. The direct connection allows for additional "manual" control.

I've got a twin rotor co-axial heli that I've been thinking about building, but for all I know it may tear itself apart.

Esprit Model · 01-24-2014, 04:26 PM

Just received excel sheet with all the options for pin assignment. You guys will have tons of options. I have to translate it to simple language over the weekend.

Zb/Jeti USA

Puttputt maru · 01-24-2014, 04:32 PM

LOL yes make it very simple language for all of us duffus

jmackey · 02-05-2014, 06:49 AM

Any updates on Jeti UDI testing?

Bubbasanjohn · 02-05-2014, 05:42 PM

think ZB said in a week on the RCG thread

rossk · 02-05-2014, 07:47 PM

It's been a week for 3 months, I wouldn't hold ya breath.
I've set my jeti cutover date in April, so hopefully it will be out by then

Thunder Fighter · 02-06-2014, 12:22 AM

The current promise is the week after the big model fare in Germany (I.e. in 1 week) so we will see. It sounded like the regression testing was all done and it was just the release itself now, unless any bugs were found in the last week or two.

//Dennis.

Written from my mobile device, we don't always agree on auto-correct choices.

jmackey · 02-06-2014, 06:09 AM

The Nuremberg Toy Fair is over now.

Jotto · 02-06-2014, 09:33 AM

Quote:

Originally Posted by jmackey

The Nuremberg Toy Fair is over now.

They probably meant Nuremberg Toy Fair 2015.

Sent from my GT-I9505 using Tapatalk

jmackey · 02-06-2014, 10:23 AM

Kiba · 02-06-2014, 10:30 AM

Jeti really needs to stop throwing out optimistic completion dates and just say "we're working on it, we will release when testing is complete" or just promise a date WAY out in the future. Given the large amount of hardware and output mode combinations they have to test for compatibility I'm not surprised it has taken this long.

Constantly missing optimistic completion estimates frustrates a lot of people. It's much better to under-promise a 6 month delivery date and deliver it "early" in 4 months rather than promise delivery in 4 weeks and then deliver it late after numerous "slips" at 4 months.

Case in point, I'm currently 27 months into waiting for a rifle stock I was promised to have in 6-7 months. I'm in no real rush but many others in the same boat as me are very vocal about their displeasure with the lead time estimate...

Given a choice between having it "right" and "right now" I'll wait longer for the software to be "right."

jmackey · 02-06-2014, 02:59 PM

Quote:

Originally Posted by Kiba

Given a choice between having it "right" and "right now" I'll wait longer for the software to be "right."

Couldn't agree more.

F1 Rocket · 02-06-2014, 05:10 PM

OK, OK.....................it will be ready when it is ready..............which should be next week.....oh dear, there I've done it again

Seriously, it is really really close.

flymustangs · 02-07-2014, 09:44 AM

Well, in this regard, Jeti is "just like" all the other manufacturers out there.

marcosp · 02-07-2014, 12:34 PM

Exactly, so it would be easy and worth it to differentiate from all those, right?

gelatmi1 · 02-07-2014, 12:47 PM

Quote:

Originally Posted by F1 Rocket

Seriously, it is really really close.

Really really or really really really close ??!!!

Bubbasanjohn · 02-07-2014, 02:40 PM

Help out a guy here. What is UDi and why is it eagerly awaited for?

Puttputt maru · 02-07-2014, 09:57 PM

Quote:

Originally Posted by Bubbasanjohn

Help out a guy here. What is UDi and why is it eagerly awaited for?

Short answer. UDI is a faster and less affected by interference digital protocol then PPM.
It is used by V-bar among others that is why a lot of people want it.

Seasick78 · 02-09-2014, 01:13 PM

Quote:

Originally Posted by Puttputt maru

Short answer. UDI is a faster and less affected by interference digital protocol then PPM.

It is used by V-bar among others that is why a lot of people want it.

PPM = Analog

UDI = Digital

gelatmi1 · 02-10-2014, 12:31 AM

Quote:

Originally Posted by F1 Rocket

OK, OK.....................it will be ready when it is ready..............which should be next week.....oh dear, there I've done it again

Seriously, it is really really close.

...and now....next week...is... THIS WEEK !!!!
I hope

!!!

01-24-2014, 04:32 PM	#63 (permalink)
Puttputt maru Registered Users Join Date: May 2009	LOL yes make it very simple language for all of us duffus __________________ TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets

02-05-2014, 06:49 AM	#64 (permalink)
jmackey Registered Users Join Date: May 2011	Any updates on Jeti UDI testing? __________________ Jay - Diligentia, Vis, Celeritas Lynx / OXY Team Pilot, Zeal Team Pilot

02-05-2014, 05:42 PM	#65 (permalink)
Bubbasanjohn Registered Users Join Date: May 2013	think ZB said in a week on the RCG thread __________________ Bubba Goblin 700 Jeti DS-16

02-05-2014, 07:47 PM	#66 (permalink)
rossk Registered Users Join Date: Mar 2012	Universal Digital Input (UDI) It's been a week for 3 months, I wouldn't hold ya breath. I've set my jeti cutover date in April, so hopefully it will be out by then __________________ [B]TT E820 - Kosmik 200, Scorp 5035 TT G4.1(x2) - OS 91 3D Speed, Hatori MSH Brains + JETI DS-16

02-06-2014, 12:22 AM	#67 (permalink)
Thunder Fighter Registered Users Join Date: Jul 2007 Location: Melb, Oz	Re: Universal Digital Input (UDI) The current promise is the week after the big model fare in Germany (I.e. in 1 week) so we will see. It sounded like the regression testing was all done and it was just the release itself now, unless any bugs were found in the last week or two. //Dennis. Written from my mobile device, we don't always agree on auto-correct choices. __________________ soXos: Strike 8.1 - Strike 7.1 Light - Strike 6.1 : Goosky: RS7 - RS4 - S2 - S1 soXos DB7 nightflyer : Jeti DS-16 & DS-12 I am www.soxosaustralia.com.au \| soXos helis \| 1st-RC Products \| EGODRIFT motors \| Goosky helis \| Spinblades

01-24-2014, 04:26 PM	#62 (permalink)
Esprit Model EspritModel.com Join Date: May 2013	Just received excel sheet with all the options for pin assignment. You guys will have tons of options. I have to translate it to simple language over the weekend. Zb/Jeti USA

02-06-2014, 06:09 AM	#68 (permalink)
jmackey Registered Users Join Date: May 2011	The Nuremberg Toy Fair is over now. __________________ Jay - Diligentia, Vis, Celeritas Lynx / OXY Team Pilot, Zeal Team Pilot

02-06-2014, 10:23 AM	#70 (permalink)
jmackey Registered Users Join Date: May 2011	__________________ Jay - Diligentia, Vis, Celeritas Lynx / OXY Team Pilot, Zeal Team Pilot

02-06-2014, 10:30 AM	#71 (permalink)
Kiba Registered Users Join Date: May 2009	Jeti really needs to stop throwing out optimistic completion dates and just say "we're working on it, we will release when testing is complete" or just promise a date WAY out in the future. Given the large amount of hardware and output mode combinations they have to test for compatibility I'm not surprised it has taken this long. Constantly missing optimistic completion estimates frustrates a lot of people. It's much better to under-promise a 6 month delivery date and deliver it "early" in 4 months rather than promise delivery in 4 weeks and then deliver it late after numerous "slips" at 4 months. Case in point, I'm currently 27 months into waiting for a rifle stock I was promised to have in 6-7 months. I'm in no real rush but many others in the same boat as me are very vocal about their displeasure with the lead time estimate... Given a choice between having it "right" and "right now" I'll wait longer for the software to be "right." __________________ Minicopter Diabolo - BD Axon, Kosmik 200, Xnova XTS 4530-480, 14S 4500, BLS255HV/BLS256HV Bergen Magnum 44 - BD Axon, Wren MW44 turbine, BLS156HV/BLS256HV Jeti DC-16 Last edited by Kiba; 02-06-2014 at 01:33 PM..

02-06-2014, 05:10 PM	#73 (permalink)
F1 Rocket Registered Users Join Date: Aug 2008	OK, OK.....................it will be ready when it is ready..............which should be next week.....oh dear, there I've done it again Seriously, it is really really close. __________________ Vertical Flight Technology Inc. Distributor: bavarianDEMON - DryFluids AeroPanda LLC Distributor: soXos Helicopter

02-07-2014, 09:44 AM	#74 (permalink)
flymustangs Registered Users My HF Map location Join Date: Jun 2007	Well, in this regard, Jeti is "just like" all the other manufacturers out there.

02-07-2014, 12:34 PM	#75 (permalink)
marcosp Registered Users Join Date: Nov 2008	Exactly, so it would be easy and worth it to differentiate from all those, right? __________________ Marcos Banshee #27, 2x TDR, Diabolo, Logo 690SX, Raptor E700, JR Sylphide E12 EX Super Gracy, Voodoo 600, Voodoo 400, Logo 550SE, Logo 400SE, JR Forza 450. Mikado Vcontrol.

02-07-2014, 02:40 PM	#77 (permalink)
Bubbasanjohn Registered Users Join Date: May 2013	Help out a guy here. What is UDi and why is it eagerly awaited for? __________________ Bubba Goblin 700 Jeti DS-16

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in