Register Now

Burg · 01-06-2008, 09:45 AM

Hi there,

Any chance a Rotorworkz 500 will be coming out for the T500?

I'd love to see a frame with the motor mounted on top so you can slide a lipo underneath the motor and gears. There's all sorts of wasted space on the current 500 frame under the gears.

cybinary · 01-31-2008, 08:38 AM

I second this idea...any chance of a aftermarket frame from you guys at Rotorworkz?

Charley Stephens · 01-31-2008, 11:22 AM

Yes I am considering it I have a kit enroute to me I will see what I can come up with

Burg · 02-10-2008, 12:00 PM

Hi,

Great! I'm looking forward to a Rotoworks frame! I'd love to see a frame with the motor mounted on the top so the space below can be used for batts.

Looking forward to your thoughts on the T-500.

jrvander · 03-06-2008, 08:34 AM

I'm sure the Rotorworkz plate is full right now, but last night I was musing over a spare Mikado Logo 10 head thinking, "Sure would be nice if I had a G4 frame that would fit this" How hard would it be to explode the G4 frame a bit and scale it up to fit a 10mm main shaft and swing 500mm blades?

- Jon

01-06-2008, 09:45 AM	#1 (permalink)
Burg Registered Users Join Date: Jun 2006	Rotorworks 500?!? Hi there, Any chance a Rotorworkz 500 will be coming out for the T500? I'd love to see a frame with the motor mounted on top so you can slide a lipo underneath the motor and gears. There's all sorts of wasted space on the current 500 frame under the gears.

01-31-2008, 08:38 AM	#2 (permalink)
cybinary Registered Users My HF Map location Join Date: Nov 2006	I second this idea...any chance of a aftermarket frame from you guys at Rotorworkz? __________________ Currently Flying! Logo 400 V-Bar: Hacker A40-12S, Jive80, 9650s, BSL241, 6s1p 3300 Lipo Lepton EX Installed in Airwolf: Hacker A30-12XL, CC80, 3102s, 401/9257, 6s1p 3300 A123 Retired Helis - Blade CX, Blade CPP, TRex450SE,

01-31-2008, 11:22 AM	#3 (permalink)
Charley Stephens Registered Users Join Date: Jul 2005	Yes I am considering it I have a kit enroute to me I will see what I can come up with __________________ Charley Stephens

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-10-2008, 12:00 PM	#4 (permalink)
Burg Registered Users Thread Starter Join Date: Jun 2006	Hi, Great! I'm looking forward to a Rotoworks frame! I'd love to see a frame with the motor mounted on the top so the space below can be used for batts. Looking forward to your thoughts on the T-500.

03-06-2008, 08:34 AM	#5 (permalink)
jrvander Join Date: Mar 2006	I'm sure the Rotorworkz plate is full right now, but last night I was musing over a spare Mikado Logo 10 head thinking, "Sure would be nice if I had a G4 frame that would fit this" How hard would it be to explode the G4 frame a bit and scale it up to fit a 10mm main shaft and swing 500mm blades? - Jon

Register Now

Log-in