Register Now

corona007 · 02-15-2009, 05:52 PM

Wow, I put KBDD tail blades on my lepton and I had to turn down my gain to 65 from 72 and it's solid. Its a little bouncy though, Not much. How can I dial this out?

mrc-hirobo · 03-01-2009, 09:37 AM

Did you have stock blades on the Heli before?

corona007 · 03-01-2009, 04:12 PM

PUMA2000 · 04-18-2009, 09:05 PM

Im using eolo tail blades(65mm) with 401/9257, tail feels solid but a bit more would be nice.
thinking of making a billet alloy 13t tail pulley and see how that goes,or put a rex500 tail (hub and grips) and run REX500 blades (68 to 72 mm).

owde · 04-19-2009, 08:54 AM

I used a 13t HDX tail pinion and it was great, it inproved the tail until it wore out and belt kept slipping, I prefer to use stock tail pinion now with 70mm blades and 2800 or more HS.

PUMA2000 · 05-17-2009, 12:38 AM

got a set of KBDD tail blades to try, WOW what a difference they made.
tail is crisp with not bounce or hesitation.A must for lepton owners for sure

Jafa · 05-17-2009, 09:30 AM

Quote:

Originally Posted by corona007

Its a little bouncy though, Not much. How can I dial this out?

Do you have equal left/right travel limits in your gyro?

02-15-2009, 05:52 PM	#1 (permalink)
corona007 Registered Users Join Date: May 2007	KBDD tail blades Wow, I put KBDD tail blades on my lepton and I had to turn down my gain to 65 from 72 and it's solid. Its a little bouncy though, Not much. How can I dial this out? __________________ Wooohoo....

03-01-2009, 09:37 AM	#2 (permalink)
mrc-hirobo Registered Users Join Date: Apr 2008	Did you have stock blades on the Heli before? __________________ - Greg G. - RC Product Mananger Model Rectifier Corporation http://www.modelrectifier.com/

03-01-2009, 04:12 PM	#3 (permalink)
corona007 Registered Users Thread Starter Join Date: May 2007	yup __________________ Wooohoo....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-18-2009, 09:05 PM	#4 (permalink)
PUMA2000 Join Date: Apr 2009	Im using eolo tail blades(65mm) with 401/9257, tail feels solid but a bit more would be nice. thinking of making a billet alloy 13t tail pulley and see how that goes,or put a rex500 tail (hub and grips) and run REX500 blades (68 to 72 mm).

04-19-2009, 08:54 AM	#5 (permalink)
owde Registered Users Join Date: Jan 2008	I used a 13t HDX tail pinion and it was great, it inproved the tail until it wore out and belt kept slipping, I prefer to use stock tail pinion now with 70mm blades and 2800 or more HS.

05-17-2009, 12:38 AM	#6 (permalink)
PUMA2000 Join Date: Apr 2009	got a set of KBDD tail blades to try, WOW what a difference they made. tail is crisp with not bounce or hesitation.A must for lepton owners for sure

Register Now

Log-in