Some Kosmik and Logview Setup videos

[dl7uae]

If the setup is different, another pole number, other ratio, - just let the generator make another file and copy it under a different name to the named location.

Select the proper device (see the screenshot above, named as you named the ini file) in LV before loading (IMPORTing) the raw log file from the SD. That's it.

[crash at 42]

Cool thanks

[Vinger]

Anybody got a link or explanation on how Logview STUDIO works with native Kosmik files? Did the update of Logview and then got the surprise that it is now STUDIO and works with PROJECTS, soooooo frustrated.....

[dl7uae]

http://www.logview.info/lvstudio_doku/index.html

It's different but it works.

To be honest: Although Dominik (developer) and I sat for hours in a steak house and he showed me everything (last summer).. I have just used the first time.

[alexd1]

I can't seem to download the logview. does someone have it saved somewhere I can download it?

[bullet3030]

wrong post

[dominoedge]

Originally Posted by Vinger

Anybody got a link or explanation on how Logview STUDIO works with native Kosmik files? Did the update of Logview and then got the surprise that it is now STUDIO and works with PROJECTS, soooooo frustrated.....

Pretty new to Kosmiks, so I read through this thread and was thinking, "this is a lot of work to view logs".

Anyway, I downloaded the LogView Studio, created a blank project, selected "Kosmik" from the device list, and then imported a DAT file. After some processing, I click on charts and it had everything there. Took about 10 minutes to setup. Works great.

[dcope17]

I just looked at my flight log. I already had Logview on my PC so I just had to get the .ini file from the generator. Even did the picture.

All worked well and the log shows everything is good. Very nice to see the BEC current. People have asked many times about servo current draw and there are no specs about that with the servos. I can only assume it all depends on so many variables. One being servo arm length will have an affect on the power required for the servo to move. So the servo current is a mystery to many and what kind of BEC is required to fly their machine.
My peak was 5A with the Kosmik 160. Well within its limits.