Register Now

rctenracer · 05-25-2014, 08:09 AM

3gxv4 with dx6i. I have align esc set at 6v bec. Using the reciever and sat. Everything is hooked up correctly . The problem is servos are doing there own thing on every stick input. Getting frustrated, need help.

Daddy · 05-25-2014, 10:40 PM

Need more specifics (doing their own thing?).

Example, when I move aileron right it pitches up.

Ex2. No input on Tx and servos randomly wander around.

rctenracer · 05-26-2014, 08:45 AM

when throttle is used only pitch servo moves. aileron and elevator servos move with elevator stick. aileron servo moves with aileron stick. swash mix is one servo 90. When i run everything out of the receiver ( no 3gx) on 120 swash everything works fine.

rctenracer · 05-26-2014, 09:20 AM

No 3gx and running and receiver only got me thinking on low bec from the align 35 esc. Picked up a castle 40 amp esc and hooked it up. Now everything works.

05-25-2014, 08:09 AM	#1 (permalink)
rctenracer Registered Users Join Date: May 2014	3gx v4 problems with dx6i 3gxv4 with dx6i. I have align esc set at 6v bec. Using the reciever and sat. Everything is hooked up correctly . The problem is servos are doing there own thing on every stick input. Getting frustrated, need help.

05-25-2014, 10:40 PM	#2 (permalink)
Daddy Registered Users My HF Map location Join Date: Jan 2010	Need more specifics (doing their own thing?). Example, when I move aileron right it pitches up. Ex2. No input on Tx and servos randomly wander around. __________________ Sigma, MCX, MSR, BOL, B400 BSR, EXI 450 Pro FBL, mCPX Align 500ESP FBL AXN FPV

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-26-2014, 08:45 AM	#3 (permalink)
rctenracer Registered Users Thread Starter Join Date: May 2014	when throttle is used only pitch servo moves. aileron and elevator servos move with elevator stick. aileron servo moves with aileron stick. swash mix is one servo 90. When i run everything out of the receiver ( no 3gx) on 120 swash everything works fine.

05-26-2014, 09:20 AM	#4 (permalink)
rctenracer Registered Users Thread Starter Join Date: May 2014	No 3gx and running and receiver only got me thinking on low bec from the align 35 esc. Picked up a castle 40 amp esc and hooked it up. Now everything works.

Register Now

Log-in