Register Now

prototype3a · 01-17-2007, 10:09 PM

What radio system are you using in your leppies? Also are you or have you had any problems with glitching?

I'm thinking about running my lepton on FM PPM for the first few flights until I determine if I have any radio interference problems then maybe pop in a pcm receiver for that added security.

Finless · 01-18-2007, 09:22 AM

I have a 14MZ and I am using a G3 RX on mine.
NO ISSUES even though the Hirobo web page says not to use a G3 on this heli...

Good component placement and smart wiring should leave you glitch free.

Bob

N3CAL · 01-18-2007, 10:25 AM

Skektrum DX7 with AR7000 RX. I built my Lepton last month and have 21 flights logged so far. No glitches, just solid flying! You can view My Gallery to see RX placement. Very compact and easy to maintain.

Cal

Ace Dude · 01-19-2007, 10:36 PM

Quote:

Originally Posted by Finless

I have a 14MZ and I am using a G3 RX on mine.
NO ISSUES even though the Hirobo web page says not to use a G3 on this heli...

Good component placement and smart wiring should leave you glitch free.

Bob

I saw that in my Lepton manual. Does anyone know what not using a G3 in the Lepton is all about?

docjoe · 01-24-2007, 06:11 PM

Spektrum DX7 now with AR6000 receiver but I was using a Spektrumized 6102 prior to the DX7 with this receiver and no problems! No glitches.

lockheed · 01-24-2007, 08:38 PM

On Dx-7, 30 flights no glitches whatsoever!

'roboRon · 04-09-2007, 02:44 AM

How are you guys configuring the AR7000, and gyro sensor on the lepton?

gtrick90 · 04-09-2007, 01:00 PM

Futaba 9C Super & r149DP

NO ISSUES at all.

N3CAL · 04-09-2007, 01:50 PM

Quote:

Originally Posted by 'roboRon

How are you guys configuring the AR7000, and gyro sensor on the lepton?

just setup my Hirobo LeptonEX using the DX7 and the Futaba GY401. It was a little confusing at first. I wasn't able to get the gear switch to work the way I wanted so I ended up doing the following:

1. (Input Select) (Hold left keys down while power is turned on)
Aux2: Gyro
Gear: INH

2: Gyro single lead plugged into Aux2

3: (Gyro Sens)
Auto

Rate:
0: 65%
1: 25%

F. Mode : Norm:0 / STNT:0 / Hold: 0

This setup ends up giving you AVCS mode in all your flight modes (Norm, STNT and HOLD). If you don't want AVCS mode for a particular flight mode change the F: mode to 1 and AVCS is now off. Just remeber when you first trun on the gyro it needs to be initalized in AVCS mode.

Best regards,
Cal

'roboRon · 04-14-2007, 06:39 AM

Cal, thanks for the info. The first thing i wanted to know was where people where putting the two parts of the AR7000 receiver along with the 401 sensor...

DX-7 Should be in on Monday so the fun begins very soon, can't wait!

N3CAL · 04-14-2007, 10:58 AM

Quote:

Originally Posted by 'roboRon

Cal, thanks for the info. The first thing i wanted to know was where people where putting the two parts of the AR7000 receiver along with the 401 sensor...

DX-7 Should be in on Monday so the fun begins very soon, can't wait!

roboRon,

Check out my Gallery Pics and you can see how I did my DX7 setup on my Lepton. The remote rx is mounted using some foam wraped and taped around it.

Best regards,
Cal

'roboRon · 04-15-2007, 05:38 AM

Cal, thats just what i wanted to see, thanks for your help

View Poll Results: What radio system are you using?
FM PPM	5	10.42%
FM PCM	27	56.25%
Spektrum	14	29.17%
Other (please specify in post)	2	4.17%
Voters: 48. You may not vote on this poll

01-17-2007, 10:09 PM	#1 (permalink)
prototype3a Registered Users My HF Map location Join Date: Jun 2006 Location: Chrisitansburg VA USA	radio?? What radio system are you using in your leppies? Also are you or have you had any problems with glitching? I'm thinking about running my lepton on FM PPM for the first few flights until I determine if I have any radio interference problems then maybe pop in a pcm receiver for that added security.

01-18-2007, 09:22 AM	#2 (permalink)
Finless Team Taco VP My HF Map location Join Date: Nov 2005	I have a 14MZ and I am using a G3 RX on mine. NO ISSUES even though the Hirobo web page says not to use a G3 on this heli... Good component placement and smart wiring should leave you glitch free. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

04-09-2007, 01:00 PM	#8 (permalink)
gtrick90 Registered Users My HF Map location Join Date: Jun 2006	Futaba 9C Super & r149DP NO ISSUES at all. __________________ - Mikado Logo 600 10S VBar Scorpion 4225-610 LE - GAUI X5 flybarless w/BeastX - GAUI 255 miniVBar / GAUI 425 stretched w/Robbe HC3X - Spektrum DX7 Special Edition Visit my blog http:/rctricks.altervista.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-18-2007, 10:25 AM	#3 (permalink)
N3CAL Join Date: Dec 2006	Skektrum DX7 with AR7000 RX. I built my Lepton last month and have 21 flights logged so far. No glitches, just solid flying! You can view My Gallery to see RX placement. Very compact and easy to maintain. Cal

01-24-2007, 06:11 PM	#5 (permalink)
docjoe Join Date: May 2006	Spektrum DX7 now with AR6000 receiver but I was using a Spektrumized 6102 prior to the DX7 with this receiver and no problems! No glitches.

01-24-2007, 08:38 PM	#6 (permalink)
lockheed Registered Users Join Date: Oct 2006	On Dx-7, 30 flights no glitches whatsoever!

04-09-2007, 02:44 AM	#7 (permalink)
'roboRon Join Date: May 2006	How are you guys configuring the AR7000, and gyro sensor on the lepton?

04-14-2007, 06:39 AM	#10 (permalink)
'roboRon Join Date: May 2006	Cal, thanks for the info. The first thing i wanted to know was where people where putting the two parts of the AR7000 receiver along with the 401 sensor... DX-7 Should be in on Monday so the fun begins very soon, can't wait!

04-15-2007, 05:38 AM	#12 (permalink)
'roboRon Join Date: May 2006	Cal, thats just what i wanted to see, thanks for your help

Register Now

Log-in