PART SWAP THREAD!

[Jason Chow]

I was curious if anybody has the logo 500/600 tail gear above the main gear - part number mik4059. That would be greatly appreciated, readyheli is out.

I also have available a used set of blade grips/spindal/thrust bearings assembly for a logo 500 if anybody is interested. I just upgrade the grips to the logo 600 14mm size. Let me know!

[flymustangs]

I don't know if Jason found one of these parts, but I'm also needing a MIK4059 to finish up a Logo 600.

I've got a bunch of new and used Logo 400 parts and a few 500 parts. Let me know what you need and I'll see if I have it.

[sil40sx]

Anyone local that have MIK4183 (Main Gear 106T)? I have couple of parts i can trade, I have the full head that includes shaft, grip assembly, swash driver and swash. I also have 600 belt (Non SE). All parts I have are used BTW...

[BorgeBorge]

Originally Posted by BennyTRD

Got some stuff left over from my 500 to 600SE conversion. The grips come with complete bearings that are smooth, and shafts are straight. 2 NIP 86mm spindles, 2 NIP CHP Landing gear braces, CHP horizontal and vertical fins, 500 boom case, 1 used set of 500 landing skids, and 1 NIP. Also not pictured are a couple of spare 500 belts that are in good shape for re-use.

Also I have 2 500 Canomod canopies that I no longer need. The Phantom has only been flown a few times and is in like new condition. The Cadmium was involved in a crash but is still very servicable. I had Canomod put my name on them, but that can easily be covered up by a new sticker or paint.

See anything you need, let me know. Might be interested in 600SE parts in they are in like new condition.

I know this is a swap thread, but I dont have anything you need...but you could use the money Im willing to pay for a canopy to buy some 600SE parts

[jakeg1999]

Sil40sx....I have one, but am down in SD......Let me know if you want to try to work something out....

[sil40sx]

I've already placed my order from RH,.. do you need sumtin I have though?

[xatled99]

I'm converting to mod 1 gearing, so I've got some mod 0.5 maingears and pinions that are free to a good home:

https://www.helifreak.com/showthread.php?t=250419

[steffgiguere]

I have a 600 boom and belt, has 9 flights before I installed a 600SE boom and belt.

[dhoff002]

anyone want to swap a pyro 700-52 for my pryo 700-45?

Dan

[OverTemp]

I have a full size back sensor vBar with 5.0 Pro to swap for a Blueline miniV!!!!! Preferably NIB.

[hawkins221]

i have some maniac 553mm blades i would like to swap for some edg fbl 553mm blades.
there as good as new but have to much pop for me,

[brian94066]

NVM

[BorgeBorge]

Originally Posted by OverTemp

I have a full size back sensor vBar with 5.0 Pro to swap for a Blueline miniV!!!!! Preferably NIB.

I got a Blueline Mini on my Trex 700 E conversion. Got under 20 flights on it.
I might want to swap....

[xatled99]

I just upgraded to a SE, so I've got a stock 500 boom, belt, struts, and pushrod that need a home.

[Jason Chow]

Im looking for the quick uk tail or rjx tail and can't seem to find them in stock anywhere. does anybody have one of these

[BorgeBorge]

Originally Posted by Jason Chow

Im looking for the quick uk tail or rjx tail and can't seem to find them in stock anywhere. does anybody have one of these

I just bought a Quik UK Trex 600 tail and put some balls on it

[Jason Chow]

Konrad, how does that compare to the original one for the logo. Im not too sure how the design differs and what I need to change. Please let me know! thanks.

[okteister1]

Jason, I just bought one from rjxhobby.com. Complete tail blade assembly, slider and arm cost me US$ 88 delivered to my door by DHL.
Perfect fit - all I had to do was cut off the untreaded part of the brass slider - a 2 minute job. They have a choice of CNC or plastic blade grips I went for the plastic because they would have a little more give. It is also beefier than stock Mikado.

[Dirtmagnet400]

Originally Posted by okteister1

Jason, I just bought one from rjxhobby.com. Complete tail blade assembly, slider and arm cost me US$ 88 delivered to my door by DHL.
Perfect fit - all I had to do was cut off the untreaded part of the brass slider - a 2 minute job. They have a choice of CNC or plastic blade grips I went for the plastic because they would have a little more give. It is also beefier than stock Mikado.

what was the part number for the tail assembly?? I checked their site and i can't find much of anything i want...

[okteister1]

Ok go to rjxhobby.com. go to Extreme 50 Nitro spare parts,
X800-60528 is plastic tail blade holder assembly or X800-60528M if you want metal one.
X800-60050 is Tail pitch slider assembly.
XT60054 is tail pitch control lever.
Like I already said its a perrfect fit - all you have to do is cut off the untreaded part of the brass slider and round off edge wyth a little bit of sandpaper - a 2 minute job and you are set to go. Doing this adds more throw on that side. Hope this helps