G4.1 update

[raptorflyer88]

Hey guys,

I thought I would give an update to anyone curious about the new G4 .1. I now have about 1 gallon through it and I must say I'm very impressed! I am running the OS 105 and the CGY 750 and they are a perfect combination. I was amazed at the power it produced even with break in settings. The only slight issue I found on a post flight inspection was a tiny bit of play in one of the blade grips. I guess the dampers have somewhat settled a little bit. When I built the kit I used all of the shims included. I ordered another shim set, but in the meantime I think it's totally safe to fly. Here's a link to a video recorded yesterday towards the end of the first gallon. I hope the link works...

[ame]http://youtu.be/zNlqqsEvLNY[/ame]


-Justin

[borgo]

yes i also have that....but my problem was that i had 1 of the 2 bolts not completly tighten it.......so i de-montage the head again and tighten everything and now its ok......i have used all of the shims too.........

i have one tank through only in idle......so next time i give him a go.....my motor is the 105hz-r ..........thanks for the film nice flying out there.

[raptorflyer88]

Yeah man, I checked my bolts and they were both tight so I guess I'll just add another tiny shim on each side. Thanks for watching man! Wasn't a very good flight cause I was too busy watching out for the maniac that kept flying a plane over my head. Haha

[borgo]

still better flying than me

[raptorflyer88]

Haha, well thanks buddy!

[Rob43]

Precisely what sort of moron flies a plane near a 90 sized heli? That was stupid! Was he trying to make a point, or just ignorant?