Logo 600 discontinued?

[1988dirk]

Originally Posted by v58fuy

I would go with the 500se and 603 mains, setup with 1800 to 1900 it will do anything you want - it is also easier on your pack than a 600 on 6s.

There is no need to upgrade to 10 or 12s if you don't want to - it is about how efficiently you run your setup, and what you expect.

David

The 500se is beyond debate, because here in germany is no combo with the same cost effectiveness like the 600 Limited Edition.

Originally Posted by 1988dirk

I want to fly with my dx8 and use the tm1000 for telemetry.The set includes everything, except for 2 spektrum satellites, i need to fly the 600 ? Right?

• Mikado Logo 600 3D Schweighofer Edition
• Mini V-Stabi 5.3 Express (AN-85431)
• GFK Haube Neon-Green Laser Chip
• Edge 603 mm Flybarless (AN-83397)
• Edge 95 mm Heckrotorblätter (AN-91555)
• Ritzel 13 Zähne (AN-91602)
• Verstärkte Servohebel
• 3x Savöx 1257TG (AN-105741)
• 1x Savöx 1290MG (AN-104231)
• 1x Motor Kontronik Pyro 650-62 (AN-89645)
• 1x Regler Castel Talon 90 (AN-106654)
• 1x LiPo 4500 mAh 6S White Line (AN-96539)

The tm1000 and the satellites will be connected with the vstabi, so there is no need for a receiver?

Maybe someone could say something about this?

[Flying Dutchy]

Yep, satellites are connected to vbar mini directly. You also need a lipo charger if you don't have one.... :-) I don't know how this tm 1000 will work as I fly Futaba...

[1988dirk]

Originally Posted by Flying Dutchy

Yep, satellites are connected to vbar mini directly. You also need a lipo charger if you don't have one.... :-) I don't know how this tm 1000 will work as I fly Futaba...

A charger is existing. So i think it is a nice price for a "rtf" set.

This will be my first building set, but i think with 2 separate ordered satellites the package is complete.

Is the black cable protection, the anti static kit, and all the other odds and ends in the logo 600 kit? I found no Information about this in the manual.

[Flying Dutchy]

Don't know as I upgraded my 500SE to 600 3D/SX over time and it was not in the SE box at the time I bought it....

[1988dirk]

Originally Posted by Flying Dutchy

Don't know as I upgraded my 500SE to 600 3D/SX over time and it was not in the SE box at the time I bought it....

Which one was not in the box? The antistatic or the cable protection? Or both were missing?

[Flying Dutchy]

I havent seen both.....

[1988dirk]

As promised a short update:

One week ago i ordered the logo 600 6s combo.
The build- and setup time was about 15-20 hours.(First kit)

Today was my first hover. I only had to add some expo, everything else was fine.

Flies super smooth and is very powerful too.
The esc,motor and battery are at 30 degrees Celsius. Flight time is about 10-13min depending on headspeed and flightstyle.

Nothing spectacular, just a little hovering.
[ame]http://youtu.be/YXtYw5cNTu8[/ame]

I would buy it again!