START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Phoenix Flight Sim Phoenix Flight Sim |
|
LinkBack | Thread Tools | Display Modes |
07-09-2014, 01:04 AM | #1 (permalink) |
Registered Users
Join Date: Jun 2006
|
Phoenix question
I just gave up my realflight V-6.0 and bought a
Phoenix. I've got it all set up and using a old dx6i With it. I don't like using my good TX with a sim. Anyway, it's all working good except every time I Change to a new heli, the SETUP WHEEL" or called "adjusting difficulty settings" comes up at 50 %. So I change it to 100 % and fly. The next time I Go back to a different heli, it's always defaulted to The 50% and I have to change it to 100 %. This Is getting old. I've clicked on default after changing It to 100 % but it never stays at 100 % after I change Helis. What am I doing wrong ? Thanks to Anyone that can help me with this issue. Brandon |
Sponsored Links | |||
Advertisement |
|
07-09-2014, 02:17 AM | #2 (permalink) |
Registered Users
Thread Starter
Join Date: Jun 2006
|
Basically, I have to change from 50 %
( Intermediate ) to 100 % ( advanced ) every Time I change to a new heli. Is this a must ? Or can I somehow set a default so that every heli I fly will automatically be at to 100 % advanced ? |
07-09-2014, 07:04 AM | #3 (permalink) |
Registered Users
|
Once I set up a heli or plank, I save them as a favorite.
Doesn't answer your question, but its one way of getting round your prob
__________________
Nigel. A few little tiddlers ..SR, 300X, TRex 500E Pro with DFC, Trex 700DFC..... and quite a few Planks and Tanks ! |
07-09-2014, 02:56 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Jun 2006
|
Thanks Nbells. 👍
|
08-12-2014, 10:25 AM | #5 (permalink) | |
Registered Users
Join Date: Dec 2013
|
Quote:
But I think saving the settings to your favorites is a way to go.
__________________
------------------- Blade 450x V2, Nano CPx, 120SR, mCX2, Scout, DX6i. Just assume I have others, I probably won't update this every time I get a new heli... ;-) |
|
08-12-2014, 09:22 PM | #6 (permalink) | |
HF Support
|
Quote:
Sport = non-3D (-4 degrees to +8 degrees and 4 degrees mid pitch) not of inverted manouvers. Standard = 3D and semi-docile (about -8 to +8 degrees and 0 degrees mid pitch). 3D = aggressive (about -13 to +13 degrees and 0 degrees mid pitch) - fly like you stole it. If you edit one ot the standard modes it becomes a "copy" and can be tuned (and renamed). Definitely the way to go if you don't like any of the canned setups.
__________________
TRex 700E Pro DFC HV (BD3SX) - Gaui X5 (6S/BD3SX), Blade 130X, RealFlight, Heli-X, Taranis+DSMX |
|
Thread Tools | |
Display Modes | |
|
|