Fix for bent motor shafts fix wild (and mild?)

[daveapplemotors]

I found a fix for the Swiss-cheese soft motor shafts. I think I used a tail motor shaft. I made a good mistake. I bought the replacement HP03 motor shaft from tmkarc1hobby in houston.The original shaft has too much 1mm metal. The repalcement I bought has 1.5mm all the way to the pinion gear. I haven't bent the shaft in over 500 crashes while I did destroy 6 main shafts, 4 main gears and one (not Lynx) Xtreme 1.5mm feathering shaft.

And it took a HUGE crash onto the clay-like baseball infield to finally bend a Lynx spindle.

My wild nanos are nearly indesctructable! Yay. They need to be because of the way I fly...

I don't have a mild one so I don't know if the fix will work on one of those.

[TheMark]

Originally Posted by daveapplemotors

I found a fix for the Swiss-cheese soft motor shafts. I think I used a tail motor shaft. I made a good mistake. I bought the replacement HP03 motor shaft from tmkarc1hobby in houston.The original shaft has too much 1mm metal. The repalcement I bought has 1.5mm all the way to the pinion gear. I haven't bent the shaft in over 500 crashes while I did destroy 6 main shafts, 4 main gears and one Lynx 1.5mm feathering shaft.

And it took a HUGE crash onto the clay-like baseball infield to finally bend a Lynx spindle.

My wild nanos are nearly indesctructable! Yay. They need to be because of the way I fly...

I don't have a mild one so I don't know if the fix will work on one of those.

Would you mind providing a direct link to the shaft you ordered from tmkarc1hobby?

Thanks in advance

Sent from my Galaxy Note 8.0

[daveapplemotors]

I am pretty sure it is this one:
https://tmkarc1hobby.com/hp03t-v2-shaft.html
but it could be https://tmkarc1hobby.com/hp03t-shaft.html
You could call 409-779-3000 and ask.

[vtown nick]

Lynx makes a 1.5mm fs for nanos?

[daveapplemotors]

my BAD Xtreme grips use the 1.5m feathering shaft.
https://tmkarc1hobby.com/helicopters...?manufacture=4