Register Now

dudeman · 08-24-2005, 01:22 AM

Can anyone help ? I have 4 choppers now, still learning, can hover, some forward flight.
Problem...i have a shogun V1, it flys....kinda, the tail is a bit wild, IE:
unstable, constant course corrections,moves entire chopper when adding power for take off.
I am using hitec eclipse 7 radio, the whole dang thing is a bit un-nerving.
Any suggestions would be great.

Thanx everyone, hope to hear from u soon !!

shafs · 08-24-2005, 04:31 AM

Do you have tail lock on and have you checked that the gain is not to high?

shafs

Kenji · 08-24-2005, 08:59 AM

also take a look at your setting and make sure you do not have any tail mixing on. I'm using the same radio in my zoom.

Kenny

dudeman · 08-24-2005, 11:33 PM

You know what guyz, i dunno bout all the tail lock and all that, i belive i set it up according to my hitec book............i think

Kenji · 08-25-2005, 07:08 AM

There is a section in your hitec that talks about revo mix. You want that to say 0 in the high stick position and the lower stick throt. position.

08-24-2005, 01:22 AM	#1 (permalink)
dudeman Registered Users Join Date: Aug 2005	MAYDAY !!!!!! Can anyone help ? I have 4 choppers now, still learning, can hover, some forward flight. Problem...i have a shogun V1, it flys....kinda, the tail is a bit wild, IE: unstable, constant course corrections,moves entire chopper when adding power for take off. I am using hitec eclipse 7 radio, the whole dang thing is a bit un-nerving. Any suggestions would be great. Thanx everyone, hope to hear from u soon !! __________________ If at first you don't get it right .........fall back and PUNT !!

08-24-2005, 11:33 PM	#4 (permalink)
dudeman Registered Users Thread Starter Join Date: Aug 2005	shogun You know what guyz, i dunno bout all the tail lock and all that, i belive i set it up according to my hitec book............i think __________________ If at first you don't get it right .........fall back and PUNT !!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-24-2005, 04:31 AM	#2 (permalink)
shafs Join Date: Jul 2005	Do you have tail lock on and have you checked that the gain is not to high? shafs

08-24-2005, 08:59 AM	#3 (permalink)
Kenji Join Date: Dec 2004	also take a look at your setting and make sure you do not have any tail mixing on. I'm using the same radio in my zoom. Kenny

08-25-2005, 07:08 AM	#5 (permalink)
Kenji Join Date: Dec 2004	There is a section in your hitec that talks about revo mix. You want that to say 0 in the high stick position and the lower stick throt. position.

Register Now

Log-in