Register Now

Moreflying · 01-11-2008, 12:01 AM

A lot of you are aware of this one being used on the 450 tail. Are there any opinions as to this servo, Airtroncs 91761Z, working on the 500 for the tail? Specs out 4.8v @ 55oz/in (0.15) and 6v @ 66 oz/in (0.12).

Finless · 01-11-2008, 08:18 AM

I think that actually is an over looked servo! Metal gears and pretty fast! However the $75 price tag is a killer

Bob

metalhead1986 · 01-11-2008, 01:38 PM

Bob - I don't know where you saw that price on the 94761Z, I got mine from Heliproz for $55.00. That is pretty much in line with the S9650, etc.

I am using them on my Lepton for cyclic servos (at your suggestion actually, in one of the build threads) and will be moving them ot my 500 to see how well they work.

Steve

Moreflying · 01-11-2008, 07:10 PM

So, it sounds like this servo will do the job then on the tail.?.I'm curious how It would do on cyclic too. They are on sale locally for 44.99.

Finless · 01-12-2008, 10:27 AM

I used on one the tail of my 450 for a long time and it was a bit picky to get working well. However once I used a 3400G I realized this servo is not that great as a tail servo.

Bob

01-11-2008, 12:01 AM	#1 (permalink)
Moreflying Registered Users Join Date: Oct 2007	94761Z On 500 A lot of you are aware of this one being used on the 450 tail. Are there any opinions as to this servo, Airtroncs 91761Z, working on the 500 for the tail? Specs out 4.8v @ 55oz/in (0.15) and 6v @ 66 oz/in (0.12).

01-11-2008, 08:18 AM	#2 (permalink)
Finless Team Taco VP My HF Map location Join Date: Nov 2005	I think that actually is an over looked servo! Metal gears and pretty fast! However the $75 price tag is a killer Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

01-12-2008, 10:27 AM	#5 (permalink)
Finless Team Taco VP My HF Map location Join Date: Nov 2005	I used on one the tail of my 450 for a long time and it was a bit picky to get working well. However once I used a 3400G I realized this servo is not that great as a tail servo. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-11-2008, 01:38 PM	#3 (permalink)
metalhead1986 Registered Users Join Date: May 2007	Bob - I don't know where you saw that price on the 94761Z, I got mine from Heliproz for $55.00. That is pretty much in line with the S9650, etc. I am using them on my Lepton for cyclic servos (at your suggestion actually, in one of the build threads) and will be moving them ot my 500 to see how well they work. Steve

01-11-2008, 07:10 PM	#4 (permalink)
Moreflying Registered Users Thread Starter Join Date: Oct 2007	So, it sounds like this servo will do the job then on the tail.?.I'm curious how It would do on cyclic too. They are on sale locally for 44.99.

Register Now

Log-in