Register Now

c/f · 12-12-2004, 06:36 AM

Any better pix or description of mounting collective servo. It looks kind of funky by the book..

capebob · 12-12-2004, 07:57 AM

I've been trying to get a decent shot of my servo, but my digital just doesn't do good closeups. My servo is mounted in the stock position and the servo arm (HS-55) lines up with the pitch lever perfectly if the pitch lever is reversed. To reverse the pitch lever loosen the collar on the collective pitch rod and remove the two little screws that mount the lever. Turn the pitch lever over and reinstall. The servo does stick out the side of the heli but it's not a problem. If you use a HS-56 or other servo that has more distance from the mounting flange to the output arm you don't have to flip the pitch lever.

Bob

12-12-2004, 06:36 AM	#1 (permalink)
c/f Registered Users My HF Map location Join Date: Oct 2004	Zoom collective servo??? Any better pix or description of mounting collective servo. It looks kind of funky by the book..

12-12-2004, 07:57 AM	#2 (permalink)
capebob Registered Users My HF Map location Join Date: Apr 2004	I've been trying to get a decent shot of my servo, but my digital just doesn't do good closeups. My servo is mounted in the stock position and the servo arm (HS-55) lines up with the pitch lever perfectly if the pitch lever is reversed. To reverse the pitch lever loosen the collar on the collective pitch rod and remove the two little screws that mount the lever. Turn the pitch lever over and reinstall. The servo does stick out the side of the heli but it's not a problem. If you use a HS-56 or other servo that has more distance from the mounting flange to the output arm you don't have to flip the pitch lever. Bob __________________ Samuel Adams field rep Buffalo Wings field rep Success is the ability to go from one failure to another with no loss of enthusiasm. Churchill

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in