What did you do to your MCPx today?

[litehawkdown]

Mine had a photo shoot today so I could post a pic.

[HRPuffnstuff]

I went tail boom first into the sidewalk yesterday shattering the boom so today I went to my lhs and got a new stock boom plus some 2mm cf rods. Took the shattered boom out and used the new cf rod to replace the broken boom. Put the new stock boom in the heli and will fly it tomorrow after the glue sets. Got the solid rod boom as a spare for the next time and then I'll do the same to it. That way I always got a spare boom ready to go and the cf rods are inexpensive.

[mrfourtysevenman]

i am the first kid to do an inverted mcpx landing. the event i was at must have had 14 of them all indoors. i also was the only one there to fly inverted and do fast circuits.

[uh1medic]

Same thing I do everyday...break it. I really need to get a sim. I just get too antsy and try things that ought to be first attempted in the virtual world.

On a positive note, I did manage to complete 2 backward flips. Took me 40ft of vertical atmosphere to accomplish, but what a trip. I subsequently augered into the ground on my third attempt, driving my tail boom right through the elevator servo. Now that takes some real talent.

[petedee]

Added a camera and went for a fly.

[ame]http://www.youtube.com/watch?v=dPbf5-bebCI&context=C357a9dcADOEgsToPDskKq1TXIe8vBJMHWC-BzsSgd[/ame]

[infamousnation]

After 15 hours of flying I decided to clean the servos and lube the bearings. One servo was really really dirty and the other two weren't.

[coredump]

I balance my blade

I reroute the tail motor wire, using shrink wrap instead of wrap it on
the tail boom. That should reduce the chance of shorting during a crash.

[Drev]

It's a shelf queen today... My grandkids are here for the day.

[photocycler]

Finally got the new servo in and got to fly it , sunshine today but winds were kicking so I said what the heck...had to be gusting 15+mph and I would say it wasnt easy to fly so flew one pack and then came back and flew a bunch in my garage

I know I need to get better and learn to fly this lil crazy copter but i ma finding it hard right now to do circles and stuff in my garage which is about 12x12 feet..im running 40 expo and 70% DRs for now

[ebeing]

flew it 100 yards downrange and lost the signal. (dx4e)

sound normal?

Whats the range of this beast, thought I would loose sight of it first.

[scottb]

Painted my blade tips bright yellow.

[CalRotor]

Petedee - Your video had me lol!

What kind of camera is it, how'd you mount it, and where'd you get it?

[Derrik]

cracked the stock tail boom so decided it was time to extend it!

[LawnDartHeli]

Lookin' good! I love the green stock canopies.

[krisma]

Originally Posted by uh1medic

Same thing I do everyday...break it. I really need to get a sim. I just get too antsy and try things that ought to be first attempted in the virtual world.

On a positive note, I did manage to complete 2 backward flips. Took me 40ft of vertical atmosphere to accomplish, but what a trip. I subsequently augered into the ground on my third attempt, driving my tail boom right through the elevator servo. Now that takes some real talent.

picture please!

[LouP]

Finished off my MH alum head. Now have new swash, rotor head, and blade holders but she's so touchy now I am having trouble flying her

LouP

[IRONJACK]

Took her outside for the first time.
Man does that thing get away fast!


Sent from my iPhone using Tapatalk

[Thefishtank]

snapped my main shaft today

[LawnDartHeli]

Just came in from flying a few packs. Been practicing aileron rolls-to-inverted at 2-3ft off the deck...gettin' pretty good at it. I'll have the wife shoot some vid later and post it up.

[LawnDartHeli]

100 0948 (1 min 0 sec)

I apologize for the quality, my wife cant keep up with my crappy flying..